Playback
Index Writing and Index Search (continued)
2.Selecting an index to search or erase.
Upon starting up the INDEX MANAGER screen, the title and index of the point for which its screen is called up will be selected.
When selecting a title No.
qPress the cursor buttons ( / / / ) on the main unit to highlight the title selection buttons ( / / / ) on the INDEX MANAGER screen.
Setup Menu
Setting the Setup Menu
Settings made in the setup menus are stored in this DVD recorder’s internal memory and will be retained even when the power is turned off. It is also possible to return to default settings whenever so required.
In addition to the buttons on the front panel, a keyboard can also be used to perform operations on these menus. The following section, however, will describe operations performed using the front panel buttons.
Keyboard : Select using the arrow keys (∞ and √), and confirm the selection using the Enter key.
wPress the SET button on the main unit to select the title No.. The title No. changes each time the SET button is pressed. The selected title No. will be displayed on the Title No. Display Area.
When selecting an index No.
qPress the cursor buttons ( / / / ) on the main unit to move within the INDEX LIST and highlight a specific index No.. w Press the SET button on the main unit and the highlighted index No. will be selected.
●The selected index No. will be displayed on the Index No. Display Area.
* To scroll the INDEX LIST automatically, highlight the 6 / 7 buttons on the INDEX MANAGER screen, followed by pressing the SET button on the main unit.
3.Performing index search
qPress the cursor buttons ( / / / ) on the main unit to highlight the PLAY button on the INDEX MANAGER screen. w Press the SET button on the main unit to execute index search.
●The unit will automatically search for the index position and play back accordingly.
●The INDEX MANAGER screen disappears.
4.Erasing indexes
Select an index according to the procedure in 2. above.
qPress the cursor buttons ( / / / ) on the main unit to highlight the ERASE button on the INDEX MANAGER screen. w Press the SET button on the main unit to display the confirmation dialog box.
e Once erase is executed via the confirmation dialog box, the selected index will be deleted.
●When doing so, an "INDEX ERASE" message will be displayed on the panel of the main unit as well as onscreen for approximately 3 seconds.
●INDEX LIST on the INDEX MANAGER screen will be sorted.
When erasing all indexes in a title,
there is no need to select the indexes.
qSelect the ALL ERS button on the INDEX MANAGER screen, followed by pressing the SET button on the main unit. ● A confirmation dialog box will be displayed.
wOnce erase is executed via the confirmation dialog box, all indexes of the selected titles will be deleted.
5.Quitting the INDEX MANAGER screen
Press the SET UP button on the main unit.
Note
Arrow keys ( / / / ) and the Enter key on the keyboard can also be used as a substitute to the cursor and SET buttons on the main unit respectively.
BUSY
| Cursor buttons |
| OPEN/CLOSE |
| (6, 7, 8 and t) |
| OPTION DV Y/C LINE |
| SET UP |
| SET UP button |
TOP | SET |
MENU | MENU |
| SET button |
Setup Menu
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
EXIT
RECORDER MENU (1/2) screen
RECORDER MENU (1/2)
MENU |
|
|
|
|
|
| MANUAL |
CHAPTER CREATION |
| ||||||
SET INTERVAL | Every05Min | ||||||
AUTO CHAPTER (RECPAUSE) | ON | ||||||
ENCODE QUALITY | SP | ||||||
TIMELAPSE REC | NO USE | ||||||
AUDIO ENCODE | DOLBY DIGITAL | ||||||
DAILY REC | NO USE |
RECORDER MENU (1/2)
MENU |
|
|
|
|
|
|
|
|
|
CHAPTER CREATION |
| MANUAL |
| ||||||
SET INTERVAL |
|
|
| ||||||
AUTO |
|
| |||||||
AUTO CHAPTER (RECPAUSE) |
|
|
| ||||||
ENCODE QUALITY | SP | ||||||||
TIMELAPSE REC | NO USE | ||||||||
AUDIO ENCODE | DOLBY DIGITAL | ||||||||
DAILY REC | NO USE | ||||||||
|
|
|
|
|
|
|
|
|
|
Settings
Setup menu operations are carried out while monitoring the display on the monitor connected to the DVI OUT, VIDEO LINE OUT or Y/C OUT terminal. In addition, setup menu content also appears on the LCD display.
Stop the DVD recorder.
1.Open the Setup Menu screen.
To do this, press the SET UP button
2.Open the setup menu in which settings are to be modified. q Use the 6 and 7 buttons to select the required screen.
w Press the SET button
* The EXIT option can be selected to return to the normal screen display.
3.Make the required settings in the setup menu.
q Use the 6 and 7 buttons to select the parameter to be set. w Press the SET button
●A list of setting values will appear.
eUse the 6 and 7 buttons to select the required value from the list and then press the SET button.
● The setting value will be modified accordingly.
r Repeat steps q through e until all of the required settings have been made.
To return to the Setup Menu, select MENU and press the SET button.
To move to the next menu screen, select the † button at the top of the current screen and press the SET button.
To return to the original menu screen, select either MENU or BACK and press the SET button.
4.Use either of the following methods to return to the normal screen display.
Press the SET UP button. or
Select EXIT from the Setup Menu and press the SET button.
|
|
|
|
|
|
|
|
|
|
| Setting list |
|
| ||||||||||
Restoring to Default Settings |
| ||||||||||
|
|
| |||||||||
| SYSTEM MENU screen | All settings from the various setup menus can be returned to the corresponding | |||||||||
| SYSTEM MENU (1/2) |
|
| default settings by setting FACTORY SETTING from the SYSTEM MENU screen | |||||||
|
|
| to EXECUTE and by then pressing the SET button. | ||||||||
| MENU |
|
|
|
|
|
|
|
|
| |
| SETUP | OFF | * The current set values for the TV TYPE item on the SYSTEM MENU (2/2) screen | ||||||||
| TEST SIGNAL | OFF | |||||||||
| will not be erased. | ||||||||||
| FACTORY SETTING |
| EXECUTE |
| |||||||
| KEYBOARD STYLE | ENGLISH |
| ||||||||
| PLAYBACK & 232C TYPE | DVD |
| ||||||||
| TOTAL RECORDING TIME | 5 Hour 30 Min |
|
58 | 59 |