Others
Troubleshooting
Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair.
General
No power is supplied to the unit.
•The AC power plug is disconnected from the AC outlet. Α Connect the AC power plug to the AC outlet securely.
Recording
Recording from the external equipment is not possible.
•The source has not been properly connected. Α Confirm that the source is properly connected.
•All necessary power switches have not been turned on. Α Confirm that all units’ power switches are turned on.
•The setting of the input select position is inappropriate.
Α Select the input in the menu that corresponds to the input terminal connected to the external equipment.
Recording cannot be made.
•No disc or a disc not being recordable with the unit is loaded. Α Load a recordable disc on the unit.
•A finalized disc is loaded.
ΑRecording cannot be made on finalized discs. Load a
recordable disc on the unit.
•The disc is full or does not have enough space for the title to
be recorded.
ΑClear unnecessary titles on the disc or load a blank disc.
Images are blurred or distorted when you start
ΑImages are blurred or distorted at the point where the playback speed changes and this is not a malfunction of the unit.
Playback does not start.
ΑPlayback does not start for approximately 30 seconds after recording is stopped and this is not a malfunction of the unit.
Service and Claims
If service is needed either during or after the warranty period:
1.Contact Stryker Endoscopy at
2.Clean and sterilize all parts that will be returned for service. Follow the instructions provided in this manual.
3.Package all the components carefully in the original shipping container if possible.
4.Ship the DVD recorder,
Stryker Endoscopy Customer Service
Attention: Repair Department
5900 Optical Court
San Jose, CA 95138
Stryker and Stryker Endoscopy are registered trademarks of Stryker Corporation.
Playback
Images do not appear on the monitor screen.
•The monitor input selector is not set to an input signal. Α Set the input select to an appropriate position.
Playback does not start or stop immediately after playback is started by pressing :.
On the front display panel, “NO DISC” appears.
•The disc is loaded upside down.
ΑPlace the disc on the disc tray with the playback surface facing down.
•A disc not being compatible with the unit is loaded.
ΑLoad a playable disc on the unit.
•A dirty disc is loaded.
ΑClean the disc.
•Defective disc is loaded.
ΑReplace the warped or scratched disc with a normal one.
76 | 77 |