JVC 240-020-505 manual Supplement for medical Use, +/- 1 kV Differential mode

Page 6

Supplement for medical Use

Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided below.

Portable and mobile RF communications equipment can affect medical electrical equipment.

WARNING : The use of accessories, transducers and cables other than those specified,with the exception of transducers and cables sold by the manufacturer of the equipment or system as replacement parts for internal components ,may result in increase emissions or decreased immunity of the equipment or system.

Information of Cables and Accessories

Make sure to use specified Accessories as described in the user manual P/N 1000-400-802, in order to maintain compliance with IEC60601-1-2.

WARNING : The equipment or system should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary,the equipment or system should be observed to verify normal operation in the configuration in which it will be used. Prior to using it in a surgical procedure, consult the tables below for guidance in placing the equipment.

WARNING : The use accessories, transducer or cable with equipment or system other than those specified may result in increased emissions or decreased immunity of the equipment or system.

Guidance and Manufacturer’s declaration-electromagnetic emissions

The customer or the user of the Model 240-020-505should assure that it is used in such an environment. The Model 240-020-505is intended for use in the electromagnetic environment specified below.

Emission Test

Compliance

Electromagnetic environment-guidance

RF emissions

Group 1

The Model 240-020-505uses RF energy only for its internal

CISPR11/EN55011

 

function. Therefore, its RF emissions are very low and are not

 

 

likely to cause any interference in nearby electronic equipment.

RF emissions

Class B

The Model 240-020-505is suitable for use in all establishments,

CISPR11/EN55011

 

including domestic establishments and those directly connected

Harmonic emissions

Class A

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

IEC/EN 61000-3-2

 

 

 

 

 

 

Voltage Fluctuations/

Complies

 

Flicker emissions

 

 

IEC/EN 61000-3-3

 

 

 

 

 

Guidance and Manufacturer’s declaration-electromagnetic immunity

The Model 240-020-505 is intended for use in the electromagnetic environment specified below.

The customer or the user of the Model 240-020-505 should assure that it is used in such an environment.

Immunity Test

IEC/EN 60601

Compliance Level

Electromagnetic

 

Test Level

 

environment-guidance

Electrostatic

+/- 6 kV : Contact

+/- 6 kV : Contact

Floor should be wood, concrete or

discharges(ESD)

+/- 8 kV : Air

+/- 8 kV : Air

ceramic tile. If floors are covered with

IEC/EN 61000-4-2

 

 

synthetic material, the relative

 

 

 

humidity should be at least 30 %.

Electrical fast

+/- 2 kV : AC mains

+/- 2 kV : AC mains

Mains power quality should be that

Transients/burst

+/- 1 kV : Signal lines

+/- 1 kV : Signal lines

of a typical commercial or hospital

IEC/EN 61000-4-4

 

 

environment.

 

 

 

 

Surge

+/- 2 kV : Common mode

+/- 2 kV : Common mode

Mains power quality should be that

IEC/EN 61000-4-5

+/- 1 kV : Differential mode

+/- 1 kV : Differential mode

of a typical commercial or hospital

 

 

 

environment.

Voltage dips, short

<5 % Ut

<5 % Ut

Mains power quality should be that

interruptions and

(>95 % dip in 100 V and

(>95 % dip in 100 V and

of a typical commercial or hospital

voltage variations

240 V) : for 0.5 cycle

240 V) : for 0.5 cycle

enviroment. If the user of the Model

on power supply

 

 

240-020-505requires continued

input lines

40 % Ut

40 % Ut

operation during power mains

 

(60 % dip in 100 V and

(60 % dip in 100 V and

interruptions, it is recommended that

IEC/EN 61000-4-11

240 V) : for 5 cycles

240 V) : for 5 cycles

the Model 240-020-505be powered

 

 

 

from an uninterruptible power supply

 

70 % Ut

70 % Ut

or a battery.

 

(30 % dip in 100 V and

(30 % dip in 100 V and

 

 

240 V) : for 25 cycles

240 V) : for 25 cycles

 

 

<5 % Ut

<5 % Ut

 

 

(>95 % dip in 100 V and

(>95 % dip in 100 V and

 

 

240 V) : for 5 s

240 V) : for 5 s

 

 

 

 

 

Power frequency

3 A/m

3 A/m

If image distortion occurs, it may be

(50 Hz/60 Hz)

 

 

necessary to position the Model 240-

Magnetic Field

 

 

020-505further from sources of

 

 

 

power frequency magnetic fields or

IEC/EN 61000-4-8

 

 

to install magnetic shielding.

 

 

 

The power frequency magnetic field

 

 

 

should be measured in the intended

 

 

 

installation location to assure that it

 

 

 

is sufficiently low.

 

 

 

 

IX

X

Image 6
Contents DVD Recorder For Customer UseImportant Safeguards Safety Precautions Precautions de Securite Information for USAUL.60601-1, CAN/CSA C22.2 NO.601.1 56PA Supplément Stryker EndoscopySupplement PictographsPrécaution d’utilisation du câble d’alimentation +/- 1 kV Differential mode Supplement for medical UseXII Recommended separation distanceContents Precautions for DVD Recorder Use IntroductionOverview of Functions Precautions for Disc Usage IntroductionDetails Regarding Discs Front Panel DVD Data ConfigurationComponent Names & Functions Screen SizesComponent Names & Functions Rear Panel LCD Display and On-Screen Content LCD DisplayDisc Repair Feature LCD Display and On-Screen ContentOn-Screen Content Status MessagesAlarm Messages Only the Video Line OUT or Y/C OUT terminal Event Messages Only the Video Line OUT or Y/C OUT terminalTurning the Power On Signal ConnectionsPower Connections Turning the Power OffInserting & Removing Discs Using a KeyboardPreparation Inserting a Disc Removing a DiscDisplaying the Date and Time Setting & Displaying the Date & TimeSetting the Date and Time To display date and time information on-screenSettings & Controls for Recording DVD RecordingPreparing a Disc for Recording Canceling the Finalization of a DVD-RW / DVD+RW Settings & Controls for RecordingPre-Recording Settings Erasing All Data From a DVD-RW / DVD+RW DiscVideo Encoding Setting the Encoding Format for Audio & VideoSetting Encoding Formats Audio EncodingSelecting the Adjustment Method Adjusting of Audio Recording LevelsAdjusting the Audio Recording Levels Checking the Video InputTitle & Chapter Menus Select DVD Menu from the Setup Menu and then press the SETConfirm the settings for the currently selected style Selecting Styles for Title & Chapter MenuRecording Recording SequenceChanging Styles for Title & Chapter Menus Recording with the Front Panel Using the Foot Switch to Perform RecordingRecording Inserting Chapter Marks Manually or AutomaticallyUsing a Keyboard to Control Recording Timelapse RecordingDaily REC Daily Recording Finalizing for Playback on Other DVD PlayersFinalizing Changing & Naming Thumbnails for Chapter Menus Title & Chapter Menu SettingsChanging Chapter Menus Thumbnail Edit Screen Opening the Thumbnail Edit Screen Changing ThumbnailsEntering Names and Comments for Chapter Menus Title & Chapter Menu SettingsChanging & Checking Chapter Menu Styles Changing the Display StyleEnding the Editing of Chapter Menus Checking the Chapter Menu ScreenChanging & Checking Title Menu Styles & Names Checking the Title Menu ScreenOpening the Title Menu Screen Finalizing Discs Change the default name in the text boxChanging Names for the Title Menu Press the Enter keyPlaying Back a Finalized Disc PlaybackPlaying Back a Disc Playing Back a Disc before FinalizingIndex Writing and Index Search PlaybackFast & Slow Playback Playing the Previous or Next ChapterSetup Menu Setting the Setup MenuSetup Menu Setup Menu ConfigurationSetup Menus Disc Menu Screen Input Select Menu ScreenSystem Menu Screen Keyboard English AC in Mode Power onPower OFF Style FrenchDVD Menu Screen Recorder Menu Screen Recorder Menu 1/2 screenRecorder Menu 2/2 screen Remote Menu Screen Clock Adjust Menu Screen Display Menu ScreenNetwork Menu Screen Operation Procedure Changing the Signal System Ntsc / PALSpecifications OthersTroubleshooting Service and ClaimsOthers Warranty Statement

240-020-505 specifications

The JVC 240-020-505 is a versatile multimedia projector that has garnered attention for its impressive features and capabilities. Designed with both home theater enthusiasts and business professionals in mind, this projector seamlessly blends cutting-edge technology with user-friendly attributes.

One of the standout features of the JVC 240-020-505 is its high-resolution output. Capable of delivering stunning images in 4K (3840 x 2160), this projector ensures that viewers experience crystal-clear visuals with vibrant colors and rich detail. The incorporation of JVC's proprietary e-shift technology enhances image sharpness and quality, providing an immersive viewing experience that is ideal for movies, presentations, and video games.

The projector utilizes advanced DLP (Digital Light Processing) technology, which is known for its exceptional color accuracy and contrast. This allows the JVC 240-020-505 to produce deep blacks and bright whites, making it suitable for a variety of lighting conditions. Whether used in a darkened home theater or a well-lit conference room, this projector adapts to its environment, ensuring optimal performance.

Another notable characteristic is its connectivity options. The JVC 240-020-505 comes equipped with multiple HDMI ports, allowing users to easily connect various devices such as Blu-ray players, gaming consoles, and laptops. The inclusion of USB ports further enhances usability, enabling direct playback of multimedia content without the need for a separate media player.

Portability is another key advantage of the JVC 240-020-505. Weighing in at a manageable size, this projector can be easily transported between locations, making it a great option for business meetings or outdoor movie nights. The user-friendly interface and remote control make setup a breeze, further enhancing its appeal for both casual users and professional environments.

Overall, the JVC 240-020-505 stands out in the crowded multimedia projector market due to its combination of high-resolution output, advanced DLP technology, versatile connectivity, and portability. Whether you’re looking to elevate your home entertainment system, make a powerful business presentation, or enjoy a cinematic experience in the comfort of your own backyard, this projector is designed to meet a variety of visual needs and exceed expectations. With its impressive specifications and thoughtful design, the JVC 240-020-505 is a worthy investment for anyone seeking premium projection capabilities.