
4 − Basic operations
The virtual front panel (VFP)
The
Note that many of these functions are hardware keys on the remote control unit.
To launch the virtual front panel
1From the home screen, press the ENTER key.
The virtual front panel appears.
There are four types of the virtual front panel: “PLAY”, “REC”, “CD”, and “etc.”
•Press CANCEL to exit the virtual front panel and return to the home screen.
2Press the function key (F1 - F4) that corresponds to the tab on the bottom of the screen to display the desired panel.
Each panel features the switches to which various functions are assigned.
3Rotate the JOG/DATA dial to select a switch in the panel.
4Use the F5 (PUSH) key or ENTER key to press the selected switch.
If a switch just toggles between on and off, a mark appears above the switch when the switch is turned on, and a mark appears above the switch when the switch is turned off.
NOTE
•In this manual, the procedure of selecting a switch in the virtual front panel and pressing the F5 key is referred to as “pressing a switch.”
•Some switches, when pressed for at least one second, present a menu of choices, but others just toggle between on and off.
Play page
ARDY
SNGL (single) Turns
NOTE
Figure 4.5: Virtual front panel (PLAY)
Figure 4.6: Virtual front panel (REC)
Figure 4.7: Virtual front panel (CD)
The single play function cannot be used with the repeat function. If either the single play or repeat function is enabled, it is disabled when the other function is enabled.
ACUE
RPT (repeat) Sets the playback repeat mode between OFF (off), ALL (all tracks of the disc are repeated) and 1Tr (the current track is repeated). (See “Repeat playback” on page 31.)
ASPC
PGM (program) Turns programmed playback on and off, and allows setting of the programmed playback mode. (See “Programmed playback” on page 30.)
FADE (fade) Turns the fade playback on and off. (See “Fades” on page 33.)
Rec page
ATRK
Figure 4.8: Virtual front panel (etc.)
TASCAM