Tascam DV-RA1000HD owner manual Recording, Fades DVD HD, Timer start DVD HD

Page 33

5 − CD playback & recording

Fades DVD HD

It is possible to create linear fades in and out when

 

playing back.

 

To display the fade time screen, press for at least one

 

second the FADE switch on the play page of the virtual

 

front panel, or the FADE key on the remote control unit.

 

Use the F1 and F2 cursor keys and the JOG/DATA dial

 

to set these values (between 0 seconds and 24 seconds).

Figure 5.3: Setting fade times

 

Fade times are set independently for fade-in and fade- out operations.

Press ENTER to confirm the fade time settings.

•When playback starts and fade mode is selected, a fade-in starts.

•When playback stops (with the STOP key) and fade mode is selected, the fade-out starts. If the STOP key is pressed during the fade, playback stops immediately.

Timer start DVD HD

The TIMER switch besides the transport keys on the front panel allows the DV-RA1000HD to start playback of the loaded disc automatically when power is sup- plied.

If the DV-RA1000HD is in ODD mode or in HDD mode with a disc already loaded, the unit plays the proj- ect that was open prior to the last shut down, or from the last position if resume playback is selected. (See “Resume playback” on page 24.)

Repeat settings (see “Repeat playback” on page 31) for the whole disc or single track are memorized when the power is turned off and on again, but the A-B mode and the A and B points are not memorized.

CAUTION

When using this function, remember to shut down the unit properly (see “Shut down” on page 19) before turning off the power, to avoid possible data loss.

Recording

The following functions are available when recording to CD-R or CD-RW. Many are also available when record- ing to DVD±RW or HD.

Basic recording operation DVD±RW HD

The transport keys enable you to record discs as if you were using a standard recorder.

1Press the RECORD key (REC key) while the trans- port section is stopped or playback is paused to place the DV-RA1000HD in record ready mode.

The RECORD key and READY key indicators light up.

the calibration is complete, the READY key indicator lights up and the unit enters record ready mode.

NOTE

Optical power calibration adjusts the laser power in accordance with the characteristics of an inserted disc so that data can be recorded at optimum qual- ity.

The DV-RA1000HD switches monitoring mode to input signal.

•When you insert a brand new disc into the disc tray and press the RECORD key, the

DV-RA1000HD automatically performs opti- cal power calibration (OPC). During the cal- ibration, the RECORD key indicator lights up and the READY key indicator flashes. When

2Press the PLAY key to start recording.

The RECORD key and PLAY key indicators light up.

•To stop recording, press the STOP key.

•To mute recording (that is, recording a silent part), press the MUTE key. Press the MUTE key briefly to mute recording. Press the

TASCAM DV-RA1000HD 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents DV-RA1000HD Important Safety Precautions Important Safety Instructions Optical pickup Safety InformationContents − Copy function 10 − Specifications, etc− Effects − Use with a computerAbout this manual − IntroductionSupplied accessories Rack-mounting the unitCopyright Handling of optical discs Environmental considerationsAbout CD-R and CD-RW discs Never use a stabilizer or printable discsBeware of condensation Rewriting limitations About DVD±R and DVD±RW discsFront panel − Names and functionsDisplay key Keys found on only the remote control unit Remote control unitFollowing keys function in the same way as − Connections PowerAnalog audio connections Digital audio connectionsOther connections − Basic operations Drive modeHDD and ODD Storage mediaShut down Adjusting the display contrastLCD screens Navigating the screensHome screen Home screen contentGo up a Menu operationsMenu tree Menu treePlay Virtual front panel VFPRec To launch the virtual front panelGeneral preferences Etc.11 Main menu Short cuts for screen accessCheck screen Clock/calendarMode Selecting the input sourceSelecting the reference clock Adjusting the input levelFinish by pressing the keyboard’s Enter key Naming files, projects, marks, etcPlayback − CD playback & recordingBasic playback operation DVD HD Display DVD HDRepeat playback DVD HD Single track playback DVD HDAuto space playback DVD HD Pitch change DVD HD Jog playback DVD HDAuto cue DVD HD Auto ready DVD HDRecording Timer start DVD HDFades DVD HD Basic recording operation DVD±RW HDSetting a level interval Automatic track increment in level modeSetting a delay Auto track increment DVD±RW HDAutomatic track increment recording in time mode Settings in the sound level screenSetting the sound threshold level Sound Level Synchronized recording DVD±RW HDSetting the sync delay parameter Sync Delay Setting DD mode DD ModeSetting the sync stop parameter Sync Stop Rehearsed synchronized recordingOscillator DVD HD Monitoring DVD HDDithering Copy protectionFinalizing discs Unfinalizing discsErasing discs CD-RW About marks DVD±RW HD Jumping to a markEditing marks Organization of projects and files − DVD±RW/HD playback & recordingWriting the Udfmi Viewing the number of rewriting timesRecording times and track lengths Using a new DVD±RW discDVD±RW discs recording HD recordingUsing a non-supported disc Using an already recorded discFull format Adding a new project Close and open operations for DVD-RW discsAdding notes to a project Close operationChanging the name of a project Changing the current projectDeleting a project from disc Formatting a discNormal mode Recording modeOverwriting mode Recording files to discPlaying back files Setting marksPlay lists Restructuring the play listErasing a file Editing filesRenaming a file Combining filesUndo and redo Dividing files− Copy function Selecting a copy mode and copy sourceSame project name in the destination Copying files and projects from a DVD to the HDCopying files and projects from the HD to DVD DV-RA1000HD displays the CD text edit screen Creating an audio CD using a project on the HD10 Selecting a copy destination project Copying tracks from a CD to the HD12 File name Setting up the effect position − EffectsEqualization Dynamics processor Dynamics processor has a number of settings avail- ableEffect libraries Recalling library dataStoring library data You can use up to 20 characters for a library data name Naming library dataDisconnecting from Windows 2000 / XP systems Connecting the DV-RA1000HD to a computerDisconnecting from Mac OS X systems − Use with a computerTransferring files between a DVD disc and a computer Transferring audio files10 − Specifications, etc Analog I/ODigital I/O Word Sync Audio performance Physical, etc. specificationsDimensions of the DV-RA1000HD Dimensional drawingPCM Mode DiagramTascam DV-RA1000HD Tascam DV-RA1000HD DV-RA1000HD
Top Page Image Contents