Tascam DV-RA1000HD owner manual Repeat playback DVD HD, Single track playback DVD HD

Page 31

5 − CD playback & recording

•Delete the last track in the program list using the F2 (DEL) key.

•Confirm the playback order and return to the previous screen using the ENTER key or

F5 (HOME) key (if this screen was entered using the RC-RA1000, the home screen is shown).

•You can also use the remote control unit key equivalents to perform these operations as well as the number keys for direct program- ming.

•When programmed playback mode is on, pressing the PGM switch on the play page of the virtual front panel or the PGM key on the remote control unit briefly to turn pro- grammed playback off. Pressing the PGM switch or PGM key for at least one second brings up the program screen.

NOTE

•If you turn programmed playback on while the recorder is in playback ready mode or playing, a track set to “ready” in the program list or a track that is currently playing will be automatically reg- istered in the program list.

If you turn programmed playback mode on while the recorder is stopped, no track will be regis- tered in the program list.

•If you press the STOP key while programmed playback mode is on, the first track on the pro- gram list will enter playback ready mode.

•If you press the ENTER key while the program screen is displayed and no track has been yet registered in the program list, programmed play- back mode will be turned off.

•During playback, you cannot delete any tracks in the program list using the F2 (DEL) key.

•Pressing the CANCEL key while the program screen is being displayed will delete the regis- tered program and programmed playback mode will be turned off.

Repeat playback DVD HD

Use the Virtual Front Panel (see “The virtual front panel (VFP)” on page 23) RPT switch to change between single-track and whole disc repeat (and off).

NOTE

The repeat function cannot be used with the single play function. If either the single play or repeat function is enabled, it is disabled when the other function is enabled.

A-B repeat Use the A-Bkey on the remote control unit to set the A and B points (these must be within the same track). The first press sets the A point, the next press sets the B point, and a third press cancels the loop. Setting a point in another track clears the previous settings.

Press the STOP key to cancel the A-B repeat function.

The remote control unit’s REPEAT key also allows these choices, but the RC-RA1000 also adds an A-B repeat loop.

Single track playback DVD HD

When the SNGL switch is turned on from the vir- tual front panel, or using the SINGLE key of the

RC-RA1000, the DV-RA1000HD plays to the end of the current track only, and then stops playback.

NOTE

This function cannot be used together with repeat playback.

Auto space playback DVD HD

When the ASPC switch is turned on from the virtual front panel, the DV-RA1000HD inserts a gap of two seconds between tracks when playing back a disc.

This can be useful when recording to an analog tape deck which can use these silences to detect track divi- sions.

TASCAM DV-RA1000HD 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DV-RA1000HD Important Safety Precautions Important Safety Instructions Optical pickup Safety InformationContents − Use with a computer 10 − Specifications, etc− Copy function − EffectsAbout this manual − IntroductionRack-mounting the unit Supplied accessoriesCopyright Handling of optical discs Environmental considerationsNever use a stabilizer or printable discs About CD-R and CD-RW discsBeware of condensation Rewriting limitations About DVD±R and DVD±RW discsFront panel − Names and functionsDisplay key Keys found on only the remote control unit Remote control unitFollowing keys function in the same way as Digital audio connections Power− Connections Analog audio connectionsOther connections Storage media Drive mode− Basic operations HDD and ODDNavigating the screens Adjusting the display contrastShut down LCD screensHome screen Home screen contentGo up a Menu operationsMenu tree Menu treeTo launch the virtual front panel Virtual front panel VFPPlay RecGeneral preferences Etc.11 Main menu Short cuts for screen accessCheck screen Clock/calendarMode Selecting the input sourceSelecting the reference clock Adjusting the input levelFinish by pressing the keyboard’s Enter key Naming files, projects, marks, etcDisplay DVD HD − CD playback & recordingPlayback Basic playback operation DVD HDSingle track playback DVD HD Repeat playback DVD HDAuto space playback DVD HD Auto ready DVD HD Jog playback DVD HDPitch change DVD HD Auto cue DVD HDBasic recording operation DVD±RW HD Timer start DVD HDRecording Fades DVD HDAuto track increment DVD±RW HD Automatic track increment in level modeSetting a level interval Setting a delaySynchronized recording DVD±RW HD Settings in the sound level screenAutomatic track increment recording in time mode Setting the sound threshold level Sound LevelRehearsed synchronized recording Setting DD mode DD ModeSetting the sync delay parameter Sync Delay Setting the sync stop parameter Sync StopCopy protection Monitoring DVD HDOscillator DVD HD DitheringUnfinalizing discs Finalizing discsErasing discs CD-RW Jumping to a mark About marks DVD±RW HDEditing marks Viewing the number of rewriting times − DVD±RW/HD playback & recordingOrganization of projects and files Writing the UdfmiHD recording Using a new DVD±RW discRecording times and track lengths DVD±RW discs recordingUsing an already recorded disc Using a non-supported discFull format Close operation Close and open operations for DVD-RW discsAdding a new project Adding notes to a projectFormatting a disc Changing the current projectChanging the name of a project Deleting a project from discRecording files to disc Recording modeNormal mode Overwriting modeRestructuring the play list Setting marksPlaying back files Play listsCombining files Editing filesErasing a file Renaming a fileUndo and redo Dividing files− Copy function Selecting a copy mode and copy sourceSame project name in the destination Copying files and projects from a DVD to the HDCopying files and projects from the HD to DVD DV-RA1000HD displays the CD text edit screen Creating an audio CD using a project on the HD10 Selecting a copy destination project Copying tracks from a CD to the HD12 File name − Effects Setting up the effect positionEqualization Dynamics processor Dynamics processor has a number of settings avail- ableRecalling library data Effect librariesStoring library data You can use up to 20 characters for a library data name Naming library data− Use with a computer Connecting the DV-RA1000HD to a computerDisconnecting from Windows 2000 / XP systems Disconnecting from Mac OS X systemsTransferring files between a DVD disc and a computer Transferring audio filesAnalog I/O 10 − Specifications, etcDigital I/O Word Sync Audio performance Physical, etc. specificationsDimensions of the DV-RA1000HD Dimensional drawingPCM Mode DiagramTascam DV-RA1000HD Tascam DV-RA1000HD DV-RA1000HD
Top Page Image Contents