Tascam DV-RA1000HD Copying tracks from a CD to the HD, Selecting a copy destination project

Page 53

9Enter or edit the text.

Use the F1-F4(cursor) keys to select a character to edit, then use the JOG/DATA dial to change the character.

You can also input characters using a keyboard connected to the PS/2 connector.

10After you edit the text, press the ENTER key.

The DV-RA1000HD displays a popup message that requests confirmation for writing the data to the CD.

11Press the ENTER key.

The write operation starts.

When the write operation is complete, a message appears, asking whether you wish to create an- other audio CD using the same source files.

12To create another audio CD, press the ENTER key.

The DV-RA1000HD automatically opens the tray. Insert a destination CD into the tray, then press the ENTER key.

The DV-RA1000HD retracts the tray, then starts to check the disc.

7 − Copy function

If you have inserted a CD-RW disc that already contains data, the DV-RA1000HD displays a pop- up message, asking whether you wish to delete the data on the disc.

Press the ENTER key to delete the data on the disc. To change the disc, press the CANCEL key.

The unit opens the tray and displays a popup message that prompts you to insert a disc.

After you delete the data on a CD-RW disc, or if you have inserted a blank CD-R/RW disc, the DV-RA1000HD displays a popup message that requests confirmation for writing to the CD. Repeat the procedure from step 11.

If you have inserted any other disc, the unit opens the tray and displays a popup message that requests that you insert a disc.

If you do not wish to create another audio CD, press the CANCEL key.

The DV-RA1000HD initiates a procedure to quit copy mode.

During this procedure, the DV-RA1000HD dis- plays a progress bar. When the procedure is complete, then displays the home screen.

Copying tracks from a CD to the HD

You can copy the tracks on a CD into a 44.1kHz/24-bit project on the HD of DV-RA1000HD. The tracks are copied in BWF format.

Copy IDs on a CD are used for tracks in the project play list. If copy-prohibited tracks are copied onto the HD as BWF files, you will be unable to edit these tracks (that is, you will be unable to divide or combine these tracks), nor can you copy them to a CD-R/RW disc.

1Select CD to HD in the copy menu screen.

2Insert a copy source CD following the instruc- tions on the screen.

The DV-RA1000HD displays a destination proj- ect selection screen that includes a list of projects that are in 44.1 kHz format on the HD.

Figure 7.10: Selecting a copy destination project

For more information, see “Selecting a copy mode and copy source” on page 49.

3Use the F1 and F2 keys to select a project into which you wish to copy the tracks.

4After selecting a project, press the ENTER key.

The DV-RA1000HD displays in the source track selection screen a list of all tracks on the CD. (Note that tracks with Copy ID set to “Prohibit” will not be included in the list.)

Figure 7.11: List of tracks on the CD

5Select the tracks you wish to copy.

To select a highlighted track, press the F1 (SELECT) key. The selected track is marked with a check mark to the left of its name.

Press the F1 key again to deselect the check- marked tracks.

TASCAM DV-RA1000HD 53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents DV-RA1000HD Important Safety Precautions Important Safety Instructions Optical pickup Safety InformationContents − Copy function 10 − Specifications, etc− Effects − Use with a computerAbout this manual − IntroductionCopyright Supplied accessoriesRack-mounting the unit Handling of optical discs Environmental considerationsBeware of condensation About CD-R and CD-RW discsNever use a stabilizer or printable discs Rewriting limitations About DVD±R and DVD±RW discsFront panel − Names and functionsDisplay key Keys found on only the remote control unit Remote control unitFollowing keys function in the same way as − Connections PowerAnalog audio connections Digital audio connectionsOther connections − Basic operations Drive modeHDD and ODD Storage mediaShut down Adjusting the display contrastLCD screens Navigating the screensHome screen Home screen contentGo up a Menu operationsMenu tree Menu treePlay Virtual front panel VFPRec To launch the virtual front panelGeneral preferences Etc.11 Main menu Short cuts for screen accessCheck screen Clock/calendarMode Selecting the input sourceSelecting the reference clock Adjusting the input levelFinish by pressing the keyboard’s Enter key Naming files, projects, marks, etcPlayback − CD playback & recordingBasic playback operation DVD HD Display DVD HDAuto space playback DVD HD Repeat playback DVD HDSingle track playback DVD HD Pitch change DVD HD Jog playback DVD HDAuto cue DVD HD Auto ready DVD HDRecording Timer start DVD HDFades DVD HD Basic recording operation DVD±RW HDSetting a level interval Automatic track increment in level modeSetting a delay Auto track increment DVD±RW HDAutomatic track increment recording in time mode Settings in the sound level screenSetting the sound threshold level Sound Level Synchronized recording DVD±RW HDSetting the sync delay parameter Sync Delay Setting DD mode DD ModeSetting the sync stop parameter Sync Stop Rehearsed synchronized recordingOscillator DVD HD Monitoring DVD HDDithering Copy protectionErasing discs CD-RW Finalizing discsUnfinalizing discs Editing marks About marks DVD±RW HDJumping to a mark Organization of projects and files − DVD±RW/HD playback & recordingWriting the Udfmi Viewing the number of rewriting timesRecording times and track lengths Using a new DVD±RW discDVD±RW discs recording HD recordingFull format Using a non-supported discUsing an already recorded disc Adding a new project Close and open operations for DVD-RW discsAdding notes to a project Close operationChanging the name of a project Changing the current projectDeleting a project from disc Formatting a discNormal mode Recording modeOverwriting mode Recording files to discPlaying back files Setting marksPlay lists Restructuring the play listErasing a file Editing filesRenaming a file Combining filesUndo and redo Dividing files− Copy function Selecting a copy mode and copy sourceSame project name in the destination Copying files and projects from a DVD to the HDCopying files and projects from the HD to DVD DV-RA1000HD displays the CD text edit screen Creating an audio CD using a project on the HD10 Selecting a copy destination project Copying tracks from a CD to the HD12 File name Equalization Setting up the effect position− Effects Dynamics processor Dynamics processor has a number of settings avail- ableStoring library data Effect librariesRecalling library data You can use up to 20 characters for a library data name Naming library dataDisconnecting from Windows 2000 / XP systems Connecting the DV-RA1000HD to a computerDisconnecting from Mac OS X systems − Use with a computerTransferring files between a DVD disc and a computer Transferring audio filesDigital I/O 10 − Specifications, etcAnalog I/O Word Sync Audio performance Physical, etc. specificationsDimensions of the DV-RA1000HD Dimensional drawingPCM Mode DiagramTascam DV-RA1000HD Tascam DV-RA1000HD DV-RA1000HD
Top Page Image Contents