Tascam RC-601mkII owner manual Selecting the Index, Searching for an intermediate point in a tune

Page 12

SELECTING THE PLAYBACK POINT

Selecting the Index

Index skip

The index can be selected (skipped) using the INDEX (</>) key.

<key:

Pressing this key when the elapsed time of an index is one second or more returns the remote control unit to the start of that track. When the elapsed time is less than one second, the remote control unit skips to the start of the previous track.

>key:

The remote control unit skips to the start of the next index. Pressing this key again makes the remote control unit skip to the start of the following index.

The operation mode after index selection conforms to operation after track selection. The auto cue function also is active. (The remote control unit stands by at the audio start point of the index.)

Specifying the index No.

When the INDEX SEARCH key is pressed in the monitor playback mode or the monitor PAUSE mode to turn the index search function ON (indicator lights), you can use the numeric keys to specify the index.

Specify indexes using two digits. For example, to specify index 3, press “0” and then “3”.

[NOTE]

•If a non-existent index No. on the track is input, the final index is automatically selected.

zThe index search function ON/OFF setting is backed up on the remote control unit. So, the same setting is reproduced when the remote control unit is next turned ON.

Searching for an intermediate point in a tune

In the monitor playback mode or monitor PAUSE, you can use the SEARCH dial or JOG/DATA dial to search for an intermediate point in a tune.

When the failsafe function is OFF, cue searches are also possible in the online READY mode. (→ page 25 “Failsafe Function”)

You can also locate specified track Nos./elapsed time.

[NOTE]

•During a cue search, the playback output level automatically drops by about 12 dB.

Using the SEARCH dial

In the monitor PAUSE mode or monitor playback mode, you can use the SEARCH dial to perform a fast-forward/ backward cue search.

Using the JOG/DATA dial

In the monitor PAUSE mode, you can use the JOG/DATA dial to perform a search one frame at a time.

Time search function

This function allows you to specify and locate a time within (from the start of) a track in the monitor playback mode or monitor PAUSE mode.

1Press the TIME SEARCH key to turn the time search function ON. (Indicator is lit.)

2In the monitor PAUSE mode or monitor playback mode, enter minutes, seconds and frames using two digits for each item. (Minutes/seconds/frame are the time elapsed from the start of the track.)

The specified point is located, and the state enters the same operation state as when the time was specified (monitor PAUSE or monitor playback).

[NOTE]

•This function cannot be used simultaneously with other functions (e.g. index search by numeric keys, time search, direct cue point locate) that use the numeric keys.

•Time searches are not possible in the program playback mode. When the mode is set to the program playback mode when the time search function is ON, the time search function is automatically canceled.

12 TASCAM RC-601MKII

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RC-601MKII Contents Product Configuration CD-601MKII Operation SettingsAbout Backup Memory IntroductionNames & Functions of Parts Top Panel Play Mode key  Check key Memo key  A, B keysRear Panel Display Window Selecting the Playback Mode Basic OperationsPreparations Playing a Specific Tune from the Beginning Single playPlaying from an Intermediate Point in a Tune Auto-registering Cue PointsDisplay of playback position Details of Transport Key Operations Selecting the Playback Point Selecting a TrackTrack skip Specifying the track NoSelecting the Index Searching for an intermediate point in a tuneMenu Configuration Menu OperationsMenu Operation Basics Saving Menu Settings Clearing Menu SettingsClearing all user banks Clearing individual user banksPLAYBACK-RELATED Functions Program PlaybackSetting the Auto Cue Level Setting Auto Cue UpAuto Cue Function Auto Ready FunctionWhen the Monitor key is pressed during monitor playback Playback Mode Repeat OperationIncremental Play Function Repeat FunctionFunctions Using Memo A, B Points Setting Memo PointsClearing Memo Point Settings Locating Memo PointsConfirming the Audio of Memo Points rehearsal Playing Back from Point aPlaying Back up to Point B Playing between Points a and BSetting Cue Points Locating Cue PointsDirectly Locating Cue Points Clearing Cue Point Settings Functions Using CUE Points CUE1 to CUE10Confirming the Time of Cue Points Flash StartSaving Disc Information Memory BanksSaving Disc Information Reading Disc InformationOUTPUT-RELATED Settings Setting the Terminals for Online OutputSetting the Terminals for Monitor Output Setting Stereo/MonauralOther Functions & Settings Headphone Monitor FunctionsReferencing to an External Clock Source Failsafe FunctionSwitching the Time Display Displaying the End of Track WarningChecking the Ending of Tracks Timer Play Function External Control-related SettingsClearing the Frame Display Viewing the Total Motor TimeSpecifications List of Error MessagesHeadphone output electrical characteristics GeneralRC-601MKII

RC-601mkII specifications

The Tascam RC-601mkII is a versatile remote control designed specifically for use with Tascam's range of digital recorders and mixing consoles. This device is a valuable tool for audio professionals, allowing for seamless operation and enhanced workflow during recording and live sessions.

One of the standout features of the RC-601mkII is its comprehensive transport control, enabling users to play, stop, rewind, and fast forward with ease. The remote is equipped with large, clearly labeled buttons that provide tactile feedback, making it simple to operate even in high-pressure environments. The ability to control multiple devices with a single unit streamlines the recording process, minimizing the need to physically interact with the main equipment.

Incorporating advanced networking technology, the RC-601mkII allows for integration with various Tascam products via the RS-232C port and through MIDI protocol. This flexibility is especially beneficial in multi-device setups, where synchronized operation is crucial. Users can also take advantage of the remote's assignable buttons, which can be configured to trigger different functions on compatible devices, expanding its usability in live scenarios or studio setups.

Another significant characteristic of the RC-601mkII is its ergonomic design. The remote features a sturdy build that ensures durability, while its compact form allows for easy transport. This portability is ideal for musicians, sound engineers, and production teams who require reliable equipment that can withstand the rigors of various environments.

The display on the RC-601mkII is intuitive, providing clear information at a glance. Users can quickly access important functions and metrics, facilitating a smoother workflow. Additionally, the remote is powered via standard batteries or through an AC adapter, offering flexibility depending on user preferences and settings.

In summary, the Tascam RC-601mkII is a powerful remote control that enhances the functionality of Tascam's digital audio products. With its user-friendly transport controls, advanced connectivity options, and robust design, it serves as an indispensable tool for those in the audio industry, whether in the studio or on stage. The RC-601mkII exemplifies Tascam's commitment to quality and innovation, making it an excellent choice for anyone seeking to elevate their audio production experience.
Top Page Image Contents