Tascam RC-601mkII owner manual Introduction, Product Configuration, CD-601MKII Operation Settings

Page 3

INTRODUCTION

Before you start using this product, thoroughly read and understand this manual. After you have finished reading this manual, be sure to keep it in a safe place so that it can be retrieved whenever necessary.

The RC-601MKII is the remote control unit exclusively for the CD-601MKII. Connecting the RC-601MKII to the CD-601MKII not only allows you to use lots more functions but also makes operation of the CD-601MKII easier.

MAIN FUNCTIONS/ADDITIONAL FUNCTIONS

The following functions can be expanded and added on to the CD-601MKII by connecting the RC-601MKII:

zTime chart/index search using the numeric keys

zSearch using the jog/search dial

zEnd check function that allows you to listen to the end of tracks

zVarious repeat playback functions (1 tune repeat, all tunes repeat, program repeat, repeat playback between A and B)

zCue point locate function. Up to ten cue points can be registered to each disc.

zInstant start from cue point (flash start function)

zCue point settings for 500 discs can be stored to memory.

zPlayback between memo points (A and B)

zMonitoring of output from up to four external audio equipment on headphones

About Terms Used in This Manual

This manual uses the following terms:

“Online READY” is used to indicate an “online playback standby state” and

“Monitor PAUSE” is used to indicate a “monitor playback standby state.”

CAUTION

Before connecting or disconnecting the connector cable to or from the CD-601MKII, first turn the CD-601MKII OFF. Connecting or disconnecting the connector cable with the power turned ON may cause the remote control unit to malfunction.

Product Configuration

This product comprises the following:

•

RC-601MKII unit

x 1

• Connector cable (5 m)

x 1

• Owner’s Manual (this manual)

x 1

•

Warranty

x 1

When unpacking this product, take care not to damage the product. Store the box and packaging materials so that they can be used for transporting the product at a later date.

If you find that any parts are missing or parts have been damaged during transportation, contact your dealer immediately.

CD-601MKII Operation Settings

Operation on the CD-601MKII can be selected between enabled and disabled when the RC-601MKII is connected.

Set enable/disable using menu No. 17 (“RMT”).

R_L (Remote + Local): Operation is possible on both the RC-601MKII and the CD-601MKII.

R (Remote): Operation is possible on only the RC-601MKII. Operation of the CD-601MKII by keys other than the OPEN/CLOSE and DISP MODE key is disabled.

*For details on menu operations, see “Menu Operations” (page 13).

About Backup Memory

The following setup information is stored to backup memory on the CD-601MKII so that the same settings are reproduced when this product is next turned ON.

•Playback mode

•Time display mode

•Auto ready function ON/OFF

•Auto cue function ON/OFF

•Pitch control function ON/OFF

•Pitch control value

•Index search function ON/OFF

•Settings for each of the menu items (*)

(*): When the “USER” menu is set to “PRE”, the menu item settings return to their defaults each time that the power is turned ON. (→ page 15 “Saving Menu Settings”)

TASCAM RC-601MKII 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RC-601MKII Contents Introduction Product ConfigurationCD-601MKII Operation Settings About Backup MemoryTop Panel Names & Functions of Parts A, B keys  Play Mode key Check key  Memo keyRear Panel Display Window Playing a Specific Tune from the Beginning Single play Selecting the Playback ModeBasic Operations PreparationsPlaying from an Intermediate Point in a Tune Auto-registering Cue PointsDisplay of playback position Details of Transport Key Operations Specifying the track No Selecting the Playback PointSelecting a Track Track skipSearching for an intermediate point in a tune Selecting the IndexMenu Operations Menu ConfigurationMenu Operation Basics Clearing individual user banks Saving Menu SettingsClearing Menu Settings Clearing all user banksProgram Playback PLAYBACK-RELATED FunctionsAuto Ready Function Setting the Auto Cue LevelSetting Auto Cue Up Auto Cue FunctionRepeat Function When the Monitor key is pressed during monitor playbackPlayback Mode Repeat Operation Incremental Play FunctionLocating Memo Points Functions Using Memo A, B PointsSetting Memo Points Clearing Memo Point SettingsPlaying between Points a and B Confirming the Audio of Memo Points rehearsalPlaying Back from Point a Playing Back up to Point BSetting Cue Points Locating Cue PointsDirectly Locating Cue Points Flash Start Clearing Cue Point SettingsFunctions Using CUE Points CUE1 to CUE10 Confirming the Time of Cue PointsReading Disc Information Saving Disc InformationMemory Banks Saving Disc InformationSetting Stereo/Monaural OUTPUT-RELATED SettingsSetting the Terminals for Online Output Setting the Terminals for Monitor OutputFailsafe Function Other Functions & SettingsHeadphone Monitor Functions Referencing to an External Clock SourceSwitching the Time Display Displaying the End of Track WarningChecking the Ending of Tracks Viewing the Total Motor Time Timer Play FunctionExternal Control-related Settings Clearing the Frame DisplayGeneral SpecificationsList of Error Messages Headphone output electrical characteristicsRC-601MKII

RC-601mkII specifications

The Tascam RC-601mkII is a versatile remote control designed specifically for use with Tascam's range of digital recorders and mixing consoles. This device is a valuable tool for audio professionals, allowing for seamless operation and enhanced workflow during recording and live sessions.

One of the standout features of the RC-601mkII is its comprehensive transport control, enabling users to play, stop, rewind, and fast forward with ease. The remote is equipped with large, clearly labeled buttons that provide tactile feedback, making it simple to operate even in high-pressure environments. The ability to control multiple devices with a single unit streamlines the recording process, minimizing the need to physically interact with the main equipment.

Incorporating advanced networking technology, the RC-601mkII allows for integration with various Tascam products via the RS-232C port and through MIDI protocol. This flexibility is especially beneficial in multi-device setups, where synchronized operation is crucial. Users can also take advantage of the remote's assignable buttons, which can be configured to trigger different functions on compatible devices, expanding its usability in live scenarios or studio setups.

Another significant characteristic of the RC-601mkII is its ergonomic design. The remote features a sturdy build that ensures durability, while its compact form allows for easy transport. This portability is ideal for musicians, sound engineers, and production teams who require reliable equipment that can withstand the rigors of various environments.

The display on the RC-601mkII is intuitive, providing clear information at a glance. Users can quickly access important functions and metrics, facilitating a smoother workflow. Additionally, the remote is powered via standard batteries or through an AC adapter, offering flexibility depending on user preferences and settings.

In summary, the Tascam RC-601mkII is a powerful remote control that enhances the functionality of Tascam's digital audio products. With its user-friendly transport controls, advanced connectivity options, and robust design, it serves as an indispensable tool for those in the audio industry, whether in the studio or on stage. The RC-601mkII exemplifies Tascam's commitment to quality and innovation, making it an excellent choice for anyone seeking to elevate their audio production experience.
Top Page Image Contents