Tascam RC-601mkII Playing from an Intermediate Point in a Tune, Auto-registering Cue Points

Page 9

BASIC OPERATIONS

4To check the playback sound, press the MONITOR key to set the remote control unit to the monitor playback mode. (The MONITOR key lights.)

z In addition to using an external monitor system, the monitor playback sound can also be checked on headphones connected to the PHONES terminal on the CD-601MKII or the remote control unit. For details when monitoring from the PHONES terminal on the remote control unit, see “Headphone Monitor Function” (page 25).

5After checking the monitor playback sound, press the READY key.

The disc returns to the tune start point, and the remote control unit enters the online READY mode. (The READY key lights.)

6Press the ON LINE key to start online playback. When the tune ends, playback automatically stops. z To cancel playback, press the STOP key.

[NOTE]

•In the default setting, the failsafe function is ON, and operation of keys other than STOP, PLAY MODE, DISPLAY MODE and REPEAT is not accepted during online playback. However, the menu system can be used to set the failsafe function OFF. (→ page 25 “Failsafe Function”)

Display of playback position

During playback, the approximate playback position in the track is displayed on the character display area of the display window in the form of a 12-dot bar. The number of square dots in this bar increases the further playback progresses. The following example shows that about 2/3 of the track has been played back.

When the time display in the display window is the track remaining mode (REMAIN), all of the square dots light at the beginning of the track, and decrease as playback progresses.

Playing from an Intermediate Point in a Tune

To search for any intermediate point in a tune and play back the final take from that point, select the track at step 3 in the procedure “Playing a Specific Tune from the Beginning” on the previous page, and perform the following.

4Search for the desired point using the search (by using the SEARCH dial), jog (by using the JOG/DATA dial) or monitor playback (by using the MONITOR key) functions, and set the remote control unit to the monitor PAUSE mode. (→ page 12 “Searching for an Intermediate Point in a Tune”)

5Press the MONITOR key to perform monitor playback, and check the point.

6Press the READY key.

The disc returns to the point preset in step 4, and the CD player enters the online READY mode. (The READY key lights.)

To adjust the setting point, press the PAUSE key to enter the monitor PAUSE mode, and return to step 4.

7Press the ON LINE key to start playback. When the tune ends, playback stops.

z To cancel playback, press the STOP key.

Auto-registering Cue Points

In the default setting, the position where monitor playback was last started from the monitor PAUSE mode is automatically registered as the cue point. When the READY key is pressed during monitor playback, the CD-601MKII is located to the cue point and enters the online READY mode.

By using menu item No. 20 (“CUE_SET”), you can select either of the following two conditions as the condition for auto-registering the cue point.

NOR (default setting): The position where monitor playback was last started from the monitor PAUSE mode is automatically registered as the cue point.

RDY: The position where monitor playback was started from the monitor PAUSE mode, or the position where the READY key was pressed from the monitor PAUSE mode is auto-registered as the cue point.

zFor details on menu operations, see “Menu Operations” (page 13).

The auto-registered cue points above can be assigned to numeric keys (CUE 1 to CUE 10) on the RC-601MKII. (→ page 21 “Functions using cue points”)

TASCAM RC-601MKII 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RC-601MKII Contents CD-601MKII Operation Settings Product ConfigurationAbout Backup Memory IntroductionTop Panel Names & Functions of Parts Check key  Play Mode key Memo key  A, B keysRear Panel Display Window Basic Operations Selecting the Playback ModePreparations Playing a Specific Tune from the Beginning Single playPlaying from an Intermediate Point in a Tune Auto-registering Cue PointsDisplay of playback position Details of Transport Key Operations Selecting a Track Selecting the Playback PointTrack skip Specifying the track NoSearching for an intermediate point in a tune Selecting the IndexMenu Operations Menu ConfigurationMenu Operation Basics Clearing Menu Settings Saving Menu SettingsClearing all user banks Clearing individual user banksProgram Playback PLAYBACK-RELATED FunctionsSetting Auto Cue Up Setting the Auto Cue LevelAuto Cue Function Auto Ready FunctionPlayback Mode Repeat Operation When the Monitor key is pressed during monitor playbackIncremental Play Function Repeat FunctionSetting Memo Points Functions Using Memo A, B PointsClearing Memo Point Settings Locating Memo PointsPlaying Back from Point a Confirming the Audio of Memo Points rehearsalPlaying Back up to Point B Playing between Points a and BSetting Cue Points Locating Cue PointsDirectly Locating Cue Points Functions Using CUE Points CUE1 to CUE10 Clearing Cue Point SettingsConfirming the Time of Cue Points Flash StartMemory Banks Saving Disc InformationSaving Disc Information Reading Disc InformationSetting the Terminals for Online Output OUTPUT-RELATED SettingsSetting the Terminals for Monitor Output Setting Stereo/MonauralHeadphone Monitor Functions Other Functions & SettingsReferencing to an External Clock Source Failsafe FunctionSwitching the Time Display Displaying the End of Track WarningChecking the Ending of Tracks External Control-related Settings Timer Play FunctionClearing the Frame Display Viewing the Total Motor TimeList of Error Messages SpecificationsHeadphone output electrical characteristics GeneralRC-601MKII

RC-601mkII specifications

The Tascam RC-601mkII is a versatile remote control designed specifically for use with Tascam's range of digital recorders and mixing consoles. This device is a valuable tool for audio professionals, allowing for seamless operation and enhanced workflow during recording and live sessions.

One of the standout features of the RC-601mkII is its comprehensive transport control, enabling users to play, stop, rewind, and fast forward with ease. The remote is equipped with large, clearly labeled buttons that provide tactile feedback, making it simple to operate even in high-pressure environments. The ability to control multiple devices with a single unit streamlines the recording process, minimizing the need to physically interact with the main equipment.

Incorporating advanced networking technology, the RC-601mkII allows for integration with various Tascam products via the RS-232C port and through MIDI protocol. This flexibility is especially beneficial in multi-device setups, where synchronized operation is crucial. Users can also take advantage of the remote's assignable buttons, which can be configured to trigger different functions on compatible devices, expanding its usability in live scenarios or studio setups.

Another significant characteristic of the RC-601mkII is its ergonomic design. The remote features a sturdy build that ensures durability, while its compact form allows for easy transport. This portability is ideal for musicians, sound engineers, and production teams who require reliable equipment that can withstand the rigors of various environments.

The display on the RC-601mkII is intuitive, providing clear information at a glance. Users can quickly access important functions and metrics, facilitating a smoother workflow. Additionally, the remote is powered via standard batteries or through an AC adapter, offering flexibility depending on user preferences and settings.

In summary, the Tascam RC-601mkII is a powerful remote control that enhances the functionality of Tascam's digital audio products. With its user-friendly transport controls, advanced connectivity options, and robust design, it serves as an indispensable tool for those in the audio industry, whether in the studio or on stage. The RC-601mkII exemplifies Tascam's commitment to quality and innovation, making it an excellent choice for anyone seeking to elevate their audio production experience.
Top Page Image Contents