Tascam RC-601mkII Other Functions & Settings, Headphone Monitor Functions, Failsafe Function

Page 25

OTHER FUNCTIONS & SETTINGS

Headphone Monitor Functions

On the RC-601MKII, you can input stereo audio output signals (max. 4 systems) from external equipment, and monitor these signals using the headphone connected to the PHONES terminal.

Monitoring on Headphones

Select the headphone monitor source using the MONITOR SELECT knob. The selected source signal is output from the PHONES terminal.

Adjust the monitor level using the LEVEL knob.

Connecting Audio Signals

Stereo audio signals of up to four systems can be input to the MONITOR IN terminal on the rear panel.

Connect to the audio output (max. output level: +6 dBV, unbalance) of the external equipment according the following pin arrangement.

[NOTE]

•The MONITOR IN terminal must be connected to also when the audio output signal of the CD-601MKII that is connected to the RC-601MKII is to be monitored.

131

2514

MONITOR IN Pin Arrangement

Pin No.

Signal Name

 

 

1

Lch IN1

Monitor input 1 Lch

2

Rch IN1

Monitor input 1 Rch

3

N.C.

 

 

4

Lch IN2

Monitor input 2 Lch

5

Rch IN2

Monitor input 2 Rch

6

N.C.

 

 

7

Lch IN3

Monitor input 3

Lch

8

Rch IN3

Monitor input 3

Rch

9

N.C.

 

 

10

Lch IN4

Monitor input 4

Lch

11

Rch IN4

Monitor input 4

Rch

12N.C.

13N.C.

14

Lch GND1

Monitor input 1 Lch shielded

15

Rch GND1

Monitor input 1 Rch shielded

16

N.C.

 

 

17

Lch GND2

Monitor input 2 Lch shielded

18

Rch GND2

Monitor input 2 Rch shielded

19

N.C.

 

 

20

Lch GND3

Monitor input 3

Lch shielded

21

Rch GND3

Monitor input 3

Rch shielded

22

N.C.

 

 

23

Lch GND4

Monitor input 4

Lch shielded

24

Rch GND4

Monitor input 4

Rch shielded

25

N.C.

 

 

Referencing to an External Clock Source

The remote control unit can be operated referenced to an external digital clock.

1Connect the word clock from an external source to the WORD SYNC IN terminal on the rear panel of the CD-601MKII.

2Set menu No. 04 (“CLOCK”) to “EXT”.

“EXT CLK” and the sampling frequency (“44.1k” or “48k”) are lit on the clock display area of the display area.

The default setting is “INT” (referenced to internal clock).

Failsafe Function

The failsafe function is a safety function for preventing playback from discontinuation when an operation key is touched inadvertently during a final take.

In the default setting, the failsafe function is ON, and operation of keys other than STOP, PLAY MODE and DISPLAY MODE is not accepted during online playback. Also, in the online READY mode, operation of search- related keys such as the TRACK key and numeric keys and the MENU key is not accepted.

[NOTE]

•Even when the failsafe function is ON, entry by the numeric keys is accepted in the direct cue point locate mode and flash start mode.

When the failsafe function is set to OFF at menu item No.

10(“F_SAFE”), all keys (excluding SEARCH dial, FLASH READY key and MEMO key in the online playback mode) are functional.

The failsafe function ON/OFF setting is valid on both the CD-601MKII and the RC-601MKII.

TASCAM RC-601MKII 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents RC-601MKII Contents CD-601MKII Operation Settings Product ConfigurationAbout Backup Memory IntroductionTop Panel Names & Functions of Parts Check key  Play Mode key Memo key  A, B keysRear Panel Display Window Basic Operations Selecting the Playback ModePreparations Playing a Specific Tune from the Beginning Single playAuto-registering Cue Points Playing from an Intermediate Point in a TuneDisplay of playback position Details of Transport Key Operations Selecting a Track Selecting the Playback PointTrack skip Specifying the track NoSearching for an intermediate point in a tune Selecting the IndexMenu Operations Menu ConfigurationMenu Operation Basics Clearing Menu Settings Saving Menu SettingsClearing all user banks Clearing individual user banksProgram Playback PLAYBACK-RELATED FunctionsSetting Auto Cue Up Setting the Auto Cue LevelAuto Cue Function Auto Ready FunctionPlayback Mode Repeat Operation When the Monitor key is pressed during monitor playbackIncremental Play Function Repeat FunctionSetting Memo Points Functions Using Memo A, B PointsClearing Memo Point Settings Locating Memo PointsPlaying Back from Point a Confirming the Audio of Memo Points rehearsalPlaying Back up to Point B Playing between Points a and BLocating Cue Points Setting Cue PointsDirectly Locating Cue Points Functions Using CUE Points CUE1 to CUE10 Clearing Cue Point SettingsConfirming the Time of Cue Points Flash StartMemory Banks Saving Disc InformationSaving Disc Information Reading Disc InformationSetting the Terminals for Online Output OUTPUT-RELATED SettingsSetting the Terminals for Monitor Output Setting Stereo/MonauralHeadphone Monitor Functions Other Functions & SettingsReferencing to an External Clock Source Failsafe FunctionDisplaying the End of Track Warning Switching the Time DisplayChecking the Ending of Tracks External Control-related Settings Timer Play FunctionClearing the Frame Display Viewing the Total Motor TimeList of Error Messages SpecificationsHeadphone output electrical characteristics GeneralRC-601MKII

RC-601mkII specifications

The Tascam RC-601mkII is a versatile remote control designed specifically for use with Tascam's range of digital recorders and mixing consoles. This device is a valuable tool for audio professionals, allowing for seamless operation and enhanced workflow during recording and live sessions.

One of the standout features of the RC-601mkII is its comprehensive transport control, enabling users to play, stop, rewind, and fast forward with ease. The remote is equipped with large, clearly labeled buttons that provide tactile feedback, making it simple to operate even in high-pressure environments. The ability to control multiple devices with a single unit streamlines the recording process, minimizing the need to physically interact with the main equipment.

Incorporating advanced networking technology, the RC-601mkII allows for integration with various Tascam products via the RS-232C port and through MIDI protocol. This flexibility is especially beneficial in multi-device setups, where synchronized operation is crucial. Users can also take advantage of the remote's assignable buttons, which can be configured to trigger different functions on compatible devices, expanding its usability in live scenarios or studio setups.

Another significant characteristic of the RC-601mkII is its ergonomic design. The remote features a sturdy build that ensures durability, while its compact form allows for easy transport. This portability is ideal for musicians, sound engineers, and production teams who require reliable equipment that can withstand the rigors of various environments.

The display on the RC-601mkII is intuitive, providing clear information at a glance. Users can quickly access important functions and metrics, facilitating a smoother workflow. Additionally, the remote is powered via standard batteries or through an AC adapter, offering flexibility depending on user preferences and settings.

In summary, the Tascam RC-601mkII is a powerful remote control that enhances the functionality of Tascam's digital audio products. With its user-friendly transport controls, advanced connectivity options, and robust design, it serves as an indispensable tool for those in the audio industry, whether in the studio or on stage. The RC-601mkII exemplifies Tascam's commitment to quality and innovation, making it an excellent choice for anyone seeking to elevate their audio production experience.
Top Page Image Contents