Tascam RC-601mkII Confirming the Time of Cue Points, Clearing Cue Point Settings, Flash Start

Page 22

FUNCTIONS USING CUE POINTS (CUE1 to CUE10)

Confirming the Time of Cue Points

The CHECK key can be used to check the time of currently registered cue points and memo points.

1When the memo mode is OFF (MEMO indicator is out), press the CHECK key.

Each press of the CHECK key displays the following: each of the cue points (1 to 10) ⇒ last auto-registered cue point ⇒ current time.

Clearing Cue Point Settings

There are two ways of clearing currently set memo points.

Method 1

1While disc operations are stopped, press the SET key to set the remote control unit to the set mode. (The indicator is lit.)

2Press the key (0 to 9) of the cue point whose settings are to be cleared.

This clears the cue point settings, and the indicator of the cue point goes out.

The SET indicator goes out.

Method 2

1When the memo mode is OFF (MEMO indicator is out), use the CHECK key to display the setting of the memo point to clear.

2Press the CLR key.

This clears the cue point settings, and the indicator of the cue point goes out.

Flash Start

The flash start setting allows you to instantly play back from a preset cue point.

1Set the cue point. (→ page 21 “Setting Cue Points”)

2In the monitor PAUSE mode, press the FLASH READY key.

The playback data at the start section of the cue point is read to buffer memory on CD-601MKII. While the data is being read, the FLASH READY indicator blinks, and the message “DATA LOAD XX” (XX: cue point No.) is displayed in the display window. When reading ends, the FLASH READY indicator stops blinking and lights.

[NOTE]

•During reading, operation of keys other than the STOP key is not accepted. When the STOP key is pressed, reading is canceled, and the FLASH READY goes out.

3Press the FLASH MODE key to set the remote control unit to the flash start mode. (The FLASH MODE indicator blinks.)

4Press the numeric key of the currently set cue point. This starts playback instantly from the cue point.

When a numeric key is pressed in the online READY mode or online playback mode, the remote control unit enters the online playback mode regardless of the failsafe function setting. When a numeric key is pressed in the monitor PAUSE or monitor playback mode, the remote control unit enters the monitor playback mode.

5To cancel the flash start mode, press the FLASH MODE key again.

[NOTE]

•To cancel flash ready, hold down the FLASH READY key in the monitor PAUSE mode. “CLEAR FLASH” is displayed in the display window, and the FLASH READY indicator goes out.

•In the flash start mode, other functions (e.g. index search by numeric keys, time search, direct cue point search) that use the numeric keys cannot be used.

•The flash start mode can be entered only when the FLASH READY indicator is lit. Otherwise, this mode cannot be entered.

•New cue points cannot be set while the FLASH READY indicator is lit.

22 TASCAM RC-601MKII

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RC-601MKII Contents About Backup Memory Product ConfigurationCD-601MKII Operation Settings IntroductionNames & Functions of Parts Top Panel Memo key  Play Mode key Check key  A, B keysRear Panel Display Window Preparations Selecting the Playback ModeBasic Operations Playing a Specific Tune from the Beginning Single playAuto-registering Cue Points Playing from an Intermediate Point in a TuneDisplay of playback position Details of Transport Key Operations Track skip Selecting the Playback PointSelecting a Track Specifying the track NoSelecting the Index Searching for an intermediate point in a tuneMenu Configuration Menu OperationsMenu Operation Basics Clearing all user banks Saving Menu SettingsClearing Menu Settings Clearing individual user banksPLAYBACK-RELATED Functions Program PlaybackAuto Cue Function Setting the Auto Cue LevelSetting Auto Cue Up Auto Ready FunctionIncremental Play Function When the Monitor key is pressed during monitor playbackPlayback Mode Repeat Operation Repeat FunctionClearing Memo Point Settings Functions Using Memo A, B PointsSetting Memo Points Locating Memo PointsPlaying Back up to Point B Confirming the Audio of Memo Points rehearsalPlaying Back from Point a Playing between Points a and BLocating Cue Points Setting Cue PointsDirectly Locating Cue Points Confirming the Time of Cue Points Clearing Cue Point SettingsFunctions Using CUE Points CUE1 to CUE10 Flash StartSaving Disc Information Saving Disc InformationMemory Banks Reading Disc InformationSetting the Terminals for Monitor Output OUTPUT-RELATED SettingsSetting the Terminals for Online Output Setting Stereo/MonauralReferencing to an External Clock Source Other Functions & SettingsHeadphone Monitor Functions Failsafe FunctionDisplaying the End of Track Warning Switching the Time DisplayChecking the Ending of Tracks Clearing the Frame Display Timer Play FunctionExternal Control-related Settings Viewing the Total Motor TimeHeadphone output electrical characteristics SpecificationsList of Error Messages GeneralRC-601MKII

RC-601mkII specifications

The Tascam RC-601mkII is a versatile remote control designed specifically for use with Tascam's range of digital recorders and mixing consoles. This device is a valuable tool for audio professionals, allowing for seamless operation and enhanced workflow during recording and live sessions.

One of the standout features of the RC-601mkII is its comprehensive transport control, enabling users to play, stop, rewind, and fast forward with ease. The remote is equipped with large, clearly labeled buttons that provide tactile feedback, making it simple to operate even in high-pressure environments. The ability to control multiple devices with a single unit streamlines the recording process, minimizing the need to physically interact with the main equipment.

Incorporating advanced networking technology, the RC-601mkII allows for integration with various Tascam products via the RS-232C port and through MIDI protocol. This flexibility is especially beneficial in multi-device setups, where synchronized operation is crucial. Users can also take advantage of the remote's assignable buttons, which can be configured to trigger different functions on compatible devices, expanding its usability in live scenarios or studio setups.

Another significant characteristic of the RC-601mkII is its ergonomic design. The remote features a sturdy build that ensures durability, while its compact form allows for easy transport. This portability is ideal for musicians, sound engineers, and production teams who require reliable equipment that can withstand the rigors of various environments.

The display on the RC-601mkII is intuitive, providing clear information at a glance. Users can quickly access important functions and metrics, facilitating a smoother workflow. Additionally, the remote is powered via standard batteries or through an AC adapter, offering flexibility depending on user preferences and settings.

In summary, the Tascam RC-601mkII is a powerful remote control that enhances the functionality of Tascam's digital audio products. With its user-friendly transport controls, advanced connectivity options, and robust design, it serves as an indispensable tool for those in the audio industry, whether in the studio or on stage. The RC-601mkII exemplifies Tascam's commitment to quality and innovation, making it an excellent choice for anyone seeking to elevate their audio production experience.
Top Page Image Contents