Tascam RC-601mkII owner manual Saving Disc Information, Memory Banks, Reading Disc Information

Page 23

SAVING DISC INFORMATION

Cue points and other disc information saved on each disc can be saved to memory on the CD-601MKII.

In addition to cue point information, disc ID, A/B memo points, pitch control values, playback mode, time display mode, and other disc information is saved.

Memory Banks

Disc information is stored to memory on the CD-601MKII. Five memory banks (A to E) are provided, and 100 discs’ worth of disc information can be stored per bank. Up to ten points can be registered to each disc.

The disc information of the same disc cannot be stored to the same bank. However, it can be stored to different banks.

Saving Disc Information

Disc information is saved to internal memory on CD-601MKII by the following operation.

1Select the save destination memory bank (A to E) using menu No. 13 (“BANK”).

2Press the SET key to set the remote control unit to the set mode.

The SET indicator lights.

3Press the Úkey.

This saves the disc information to the bank, and the memory indication (“M”) in the display window lights.

The SET indicator goes out.

zWhen the disc information of the same disc is already saved, the message “Over write?” prompting you if it is OK to overwrite the information will be displayed. To overwrite the information, either press the Úkey again, or turn the SEARCH dial clockwise (towards YES). To not overwrite the information, either press the CLR key, or turn the SEARCH dial counterclockwise (towards NO).

zThe message “Over write?” prompting you if it is OK to overwrite the information will also be displayed when 100 discs’ worth of information is already saved.

To overwrite, select one of memory Nos. 1 to 100 to overwrite using the JOG/DATA dial, and either press the Úkey again, or turn the SEARCH dial clockwise (towards YES). To not overwrite the information, either press the CLR key, or turn the SEARCH dial counterclockwise (towards NO).

Reading Disc Information

When a disc containing disc information saved to internal memory on the CD-601MKII is loaded, the memory indication (“M”) lights in the display window.

To read disc information, perform the following.

1Press the RCL key.

The RCL indicator lights, and the “M” indication in the display window blinks.

2Press the Úkey.

The disc information is read, and the “M” indication in the display window stops blinking and is lit.

The RCL indicator goes out.

Clearing Disc Information

The disc information currently saved to internal memory on the CD-601MKII can be cleared. All of the disc information in all of the banks is cleared by the following operation.

When menu No. 21 (“A_CLR”) is selected, the message “SURE?” will be displayed. Press the Úkey (or turn the SEARCH dial clockwise).

The details that are cleared differ according to the setting of menu No. 22 (“USER”) as follows: (→ page 15 “Saving Menu Settings”)

•When set to “U1” to “U5”: All disc information is cleared.

•When set to “PRE”: All disc information is cleared, and the menu settings of user banks “U1” to “U5” are returned to their default settings.

TASCAM RC-601MKII 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents RC-601MKII Contents Introduction Product ConfigurationCD-601MKII Operation Settings About Backup MemoryTop Panel Names & Functions of Parts A, B keys  Play Mode key Check key  Memo keyRear Panel Display Window Playing a Specific Tune from the Beginning Single play Selecting the Playback ModeBasic Operations PreparationsDisplay of playback position Playing from an Intermediate Point in a TuneAuto-registering Cue Points Details of Transport Key Operations Specifying the track No Selecting the Playback PointSelecting a Track Track skipSearching for an intermediate point in a tune Selecting the IndexMenu Operations Menu ConfigurationMenu Operation Basics Clearing individual user banks Saving Menu SettingsClearing Menu Settings Clearing all user banksProgram Playback PLAYBACK-RELATED FunctionsAuto Ready Function Setting the Auto Cue LevelSetting Auto Cue Up Auto Cue FunctionRepeat Function When the Monitor key is pressed during monitor playbackPlayback Mode Repeat Operation Incremental Play FunctionLocating Memo Points Functions Using Memo A, B PointsSetting Memo Points Clearing Memo Point SettingsPlaying between Points a and B Confirming the Audio of Memo Points rehearsalPlaying Back from Point a Playing Back up to Point BDirectly Locating Cue Points Setting Cue PointsLocating Cue Points Flash Start Clearing Cue Point SettingsFunctions Using CUE Points CUE1 to CUE10 Confirming the Time of Cue PointsReading Disc Information Saving Disc InformationMemory Banks Saving Disc InformationSetting Stereo/Monaural OUTPUT-RELATED SettingsSetting the Terminals for Online Output Setting the Terminals for Monitor OutputFailsafe Function Other Functions & SettingsHeadphone Monitor Functions Referencing to an External Clock SourceChecking the Ending of Tracks Switching the Time DisplayDisplaying the End of Track Warning Viewing the Total Motor Time Timer Play FunctionExternal Control-related Settings Clearing the Frame DisplayGeneral SpecificationsList of Error Messages Headphone output electrical characteristicsRC-601MKII

RC-601mkII specifications

The Tascam RC-601mkII is a versatile remote control designed specifically for use with Tascam's range of digital recorders and mixing consoles. This device is a valuable tool for audio professionals, allowing for seamless operation and enhanced workflow during recording and live sessions.

One of the standout features of the RC-601mkII is its comprehensive transport control, enabling users to play, stop, rewind, and fast forward with ease. The remote is equipped with large, clearly labeled buttons that provide tactile feedback, making it simple to operate even in high-pressure environments. The ability to control multiple devices with a single unit streamlines the recording process, minimizing the need to physically interact with the main equipment.

Incorporating advanced networking technology, the RC-601mkII allows for integration with various Tascam products via the RS-232C port and through MIDI protocol. This flexibility is especially beneficial in multi-device setups, where synchronized operation is crucial. Users can also take advantage of the remote's assignable buttons, which can be configured to trigger different functions on compatible devices, expanding its usability in live scenarios or studio setups.

Another significant characteristic of the RC-601mkII is its ergonomic design. The remote features a sturdy build that ensures durability, while its compact form allows for easy transport. This portability is ideal for musicians, sound engineers, and production teams who require reliable equipment that can withstand the rigors of various environments.

The display on the RC-601mkII is intuitive, providing clear information at a glance. Users can quickly access important functions and metrics, facilitating a smoother workflow. Additionally, the remote is powered via standard batteries or through an AC adapter, offering flexibility depending on user preferences and settings.

In summary, the Tascam RC-601mkII is a powerful remote control that enhances the functionality of Tascam's digital audio products. With its user-friendly transport controls, advanced connectivity options, and robust design, it serves as an indispensable tool for those in the audio industry, whether in the studio or on stage. The RC-601mkII exemplifies Tascam's commitment to quality and innovation, making it an excellent choice for anyone seeking to elevate their audio production experience.
Top Page Image Contents