Klipsch CS-700 owner manual Complete the On-screen Setup

STEP 9: Complete the On-screen Setup

1.Press MENU on your Klipsch system remote control (the main menu appears).

2.Press arrow down Çto highlight Setup and press ENTER (the Setup menu items appear).

Match the on-screen option with the cables that are connected to each of the jacks on your Klipsch system. This information tells the system what is connected to it, and which cables and jacks were used.

3.TV Audio Connection: If you made a TV Audio connection, use the arrow button to select where you connected the TV’s AuDIO OUTPUT to the Klipsch system’s AuDIO InPUT. Use the Å or Ç arrow button to highlight the correct option and press ENTER.

SAT/CABLE/HD: Choose this option if you connected audio from the TV to one of the three AuDIO InPUT options in the SAT/CABLE/HD INPUT section on the back of the Klipsch system.

AUX 1: Choose this option if you connected audio from the TV to one of the audio options in the AUX 1 INPUT section on the back of the Klipsch system.

AUX 2: Choose this option if you connected the TV’s audio to one of the

AUX 2 INPUT audio options on the side of the Klipsch system.

No Audio Connection: Choose this option if you didn’t connect the audio from the TV to the Klipsch system. You’ll only hear audio from the Klipsch system when you’re playing the radio or a disc, or through one of the components connected to the Klipsch System (e.g., VCR, DVD Recorder, mp3 player, etc.).

Note: If you connected the audio from the TV's Audio Output jacks to the Klipsch system, you'll need to turn off your TV's internal speakers and may need to adjust the audio setting in the TV's menu system. Locate your TV manual to get specific instructions, as the procedures differ for different brands and types of televisions.