Playing CDs with mp3 or Jpeg files

What you see on the TV screen when playing CDs with audio and picture files depends upon the way the discs were formatted and the file type used. Initially, the root menu will be displayed on the left side. Folders or files will be displayed on the right and can be selected. Highlight the desired folder or file from the right side and press ENTER. If a folder has been selected, its contents will be displayed in this area. If a file has been selected, it will play or be displayed on the screen. To navigate back up a level, select the root menu from the right side. Å and Ç arrows keys are used to navigate through the list. If the disc doesn’t play, consult the application you used to create the disc.

On-screen info banner

To access the radio info banner, press INFO on the remote control.

Playing the Radio

When you are in the Tuner Mode, the remote control can be used to tune radio stations. Use the FORWARD and REVERSE or the CHANNEL Å or Ç button to change the frequency.

Setting up presets:

1.Tune to the station you would like. Press and hold the PRESET button for approximately three seconds and release. You will see a number that signals the next available preset on the display. Press the PRESET button again to stop the flashing and store the station.

2.To change a preset you already have, tune to the preset station you want to change and follow step 1.

3.There are twenty presets –10 FM and 10 AM.



Frequency		Presets
Displays the		Accesses presets
Displays the
current station	Tuning
current station	Tuning		RDS
	Options include		RDS
	Options include		Radio Data
	Seek, Scan, Step		Radio Data
	Seek, Scan, Step		System
	and Presets		System
	and Presets
	Tuning Mode: To access different ways to tune
	to various radio stations, press ENTER with the Tuning
	icon highlighted (the tuning options appear). Use the Ç
	arrow button to highlight the option you want to use and
	press ENTER.
	Seek: Goes to the next available station and
	stays tuned to it.
	Scan: Previews stations throughout the
	frequency—plays for several seconds and then
	moves to the next station. To tune to a station
	during scan, press ENTER while it is playing.
	Step: Moves incrementally one frequency step
	at a time.

Presets: Shows you the station number for each of the presets available. Highlight the icon and press ENTER or Ç arrow to see list and select.

RDS: RDS stands for Radio Data System and enables broadcasters to embed information in the signal. You can choose to turn this feature on or off. Highlight this icon and press ENTER or press the down Ç arrow to see list.

Klipsch CS-700 Playing CDs with mp3 or Jpeg files, On-screen info banner, Playing the Radio