Klipsch CS-700 owner manual TV Audio Connection, TV Back Panel, Off-Air

Connections  page 3/4

STEP 3B: TV Audio Connection

Use this connection if you receive your TV signal via regular cable (no cable box) or with an off-air antenna.

TV BACK PANEL

COMPOSITE		COMPONENT		COMPONENT		AUDIO / VIDEO
INPUT 1	INPUT 2	INPUT 3	INPUT 4	OUTPUT		OUTPUT
R	R	Y	Y	Y		R
L	L	PB	PB	PB		L
V	V	PR	PR	PR		V
S-VIDEO	S-VIDEO	DIGITAL COAXIAL	DIGITAL OPTICAL		ANTENNA A		ANTENNA B
		OUTPUT	OUTPUT		INPUT		INPUT
							CABLE OR
							OFF-AIR
							ANTENNA
		1B - OR -		1C	- OR -		1A

KLIPSCH CONTROLLER

If you don't have a set-top box connected to your TV (you either have cable coming out of the wall or an off-air antenna, such as HD), simply connect the Audio OUTPUT jacks on the TV to the Audio INPUT jacks on the Klipsch system. If you want the TV sound to come through the Klipsch system, you need to make this audio connection.

1.Choose the best TV AUDIO connection available (1A, 1B, or 1C).

A.If your TV doesn’t have DiGITAL Optical or DiGITAL Coaxial for the audio connection, connect standard audio cables (you can use the supplied cables for this if you have not already used them) to the aUDIO left (white) and aUDIO right (red) output jacks on the back of your TV and to the Klipsch system’s SAT/Cab/HD INPUT jacks that are labeled L and R.

B.If your TV has a Digital Audio (COAXIAL) Output jack, connect appropriate cable (not supplied) to the TV’s AuDIO Coaxial OutPUT jack and to the Klipsch System’s SAT/Cab/HD INPUT COAXIAL jack.

C.If your TV has a DiGITAL Audio (OPTICAL) Output jack, connect appropriate cable (not supplied) to it and the other end to the Klipsch System’s SAT/Cab/HD INPUT OPTICAL jack.

2.Make note of which audio input you used (SAT/CAB, AuX 1, Aux 2), as you will need to enter the correct audio input setting during the on-screen setup procedure in Step 9.

Input and Output Jacks

Please see appendix I (page 28) for the basics on how input and output jacks work with your Klipsch system.