ConneCtI ons page 1/2
STeP 1: unpack the box
Make sure you have the following items as you unpack your Klipsch system.
0 | 0 | 0 | 0 | 0 |
ControllerSubwoofer
0 0
| Left/Right Speakers | Setup Guide | Owner’s Manual |
| |||
0 | 0 | 0 |
Remote Control | 2 AA Remote Batteries | Composite Video | Left/Right Audio Cable | |
Cable (Yellow) | (Red and White) | |||
0 | 0 | 0 | 0 | |
AM Antenna | 2 | Subwoofer | Mini plug to | |
Speaker Cables | Power Cable | RCA Adapter | ||
|
FM Antenna
0
Rubber Pads
Step 2: Put the batteries in the remote control
1.Locate supplied remote control and batteries.
2.Remove the battery compartment cover on the back of the remote. Push down on the tab and lift the cover.
3.Insert the two (2) “AA” batteries. Make sure the polarities (+ and
4.Replace the cover.