Connect Klipsch System to the TVs Input

STEP 4: Connect Klipsch System to the TV's Input

TV BACK PANEL

COMPOSITE		COMPONENT		COMPONENT	AUDIO / VIDEO
INPUT 1	INPUT 2	INPUT 3	INPUT 4	OUTPUT	OUTPUT
R	R	Y	Y	Y	R
L	L	PB	PB	PB	L
V	V	PR	PR	PR	V
S-VIDEO		DIGITAL COAXIAL	DIGITAL OPTICAL	ANTENNA A ANTENNA B		HDMI
		DIGITAL COAXIAL	DIGITAL OPTICAL	ANTENNA A ANTENNA B		HDMI
		OUTPUT	OUTPUT	INPUT	INPUT	INPUT

1 - OR - 2 3 OR 4

KLIPSCH CONTROLLER

1.If your TV doesn’t have HDMI or Component, but has S-Video, connect S-Video cable (not supplied) to the Klipsch system’s VIDEO OUTPUT S-VIDEO jack and to the corresponding S-VIDEO jack on the TV.

2.If your TV has CoMPONENT INPUT jacks (Y, PB, PR) connect the (not supplied) corresponding cables (either bundled or three separate video grade cables—yellow) to the Klipsch system’s VIDEO OUTPUT COMPONENT Y, PB, PR jacks and to the corresponding input jacks on the TV. To use this option, you must also connect the corresponding Y, PB, PR output to your TV.

3.If your TV doesn’t have CoMPONENT or S-Video, connect the TV’s VIDEO INPUT (yellow) to the Klipsch system’s COMPOSITE jack (yellow) with the supplied cable.

4.If your TV has an HDMI INPUT, connect the corresponding HDMI cable (not supplied) from the HDMI output of the Klipsch system to the HDMI input of the TV.

5.If you’re using component jacks or HDMI and your TV supports progressive scanning technology (see the TV owner’s manual if you don’t know whether your TV is a progressive scan TV), slide the P.Scan switch on the back of your Klipsch system to the ON position. If you put the P.SCAN switch in the ON position and your TV doesn’t support progressive scan, you won’t see a picture on the TV screen.

Note: Until recently, TVs only had video input jacks. Therefore, your TV might not carry the "IN" or "Input" label even though it is an input.

Note: If an HDMI (digital) input is used to connect a source (such as a cable or satellite box) to the CS-700, the TV must also be connected with an HDMI cable to preserve the digital signal. Also, if an analog signal is connected to the CS-700, the TV must also be connected with an analog signal. The CS-700 will not up-convert an analog signal to a digital signal.

Input and Output Jacks

Please see appendix I (page 28) for the basics on how input and output jacks work with your Klipsch system.