Klipsch CS-700 specs

Connections page 9/10

4.TV Format: TV Format lets you choose between a standard TV screen and a Widescreen option. The Widescreen option has an aspect ratio of 16:9. If your TV has a 4:3 aspect ratio, select either the Standard or Letterbox option depending on your preference.

5.RDS (Radio Data System): RDS is the system that allows broadcasters to embed programming information in to the radio signal, such as the name of the artist or song. Your Klipsch system is RDS-enabled.

If you want to turn on RDS, choose On and press ENTER (the name of the radio station will appear on the Klipsch display).

Note: On most U.S. radio stations, artist and title information will appear with the “Station ID.”

6.WIRELESS: Your Klipsch CS-700 system uses KlipschCast wireless technology to transmit the subwoofer signal from the A/V center to the subwoofer. The system is also capable if using KlipschCast to transmit any of its sources, on-board or auxiliary, throughout your home in CD quality. This signal can then be received and played

by other Klipsch audio products using KlipschCast technology.

Selecting Subwoofer Only turns off the wireless broadcast to all KlipschCast components except the CS-700 subwoofer. For example, this might be done when viewing/listening to content on the CS-700 that you do not wish to broadcast to other KlipschCast components.

Selecting All Off will disable all wireless transmission including the subwoofer signal. This is primarily used for diagnostics.

7.HOME CODE: The Home Code feature allows you to select a unique channel for all your KlipschCast components to keep your content private and unavailable to other nearby systems. The Home Code default is 0 for all KlipschCast components and does not need to be changed unless other nearby KlipschCast systems interfere. All KlipschCast components (including your subwoofer) in your multi-room system must be on the same home code to interact with one another. To check or change the home code on the CS-700, select Home Code in the Setup Menu. From here you can see the selected Home Code and change it if necessary.

To check or change the Home Code on your subwoofer, find the Home Code dial on the rear of the subwoofer. The dial can be rotated with a small flat blade screwdriver to select the desired number. If you change the Home Code you must turn the subwoofer off and on again to reset the Home Code. The cinema system and subwoofer must be on the same Home Code to communicate wirelessly.