JVC HR-XVC33UM manual Press Menu

Filename [XVC33UM_06Index.fm]
XVC33UM_01.book Page 17 Monday, August 4, 2003 7:24 PM	Masterpage:Right-No-Heading

		EN 17
		NOTE:
F Start Auto Channel Set.
		If there is a power cut, or if you press 1 or SET UP MENU while
Press MENU.		Auto Channel Set is in progress, Auto Channel Set will be
		interrupted; be sure to turn off the unit power once and try again
		from step A.
DO NOT press any button on the unit or Remote while Auto
Channel Set is in progress.		ATTENTION
● Receivable channels in your area	AUTO CHANNEL SET	If you perform Auto Channel Set successfully during
		installation, there's no need to separately perform the
are automatically assigned to the
		Language Select, Clock Set or Channel Set procedures, but if
CH +/– buttons, and non-
		adjustments become necessary, they can be performed as
receivable channels are skipped.	SCANNING...
		follows:
● When Auto Channel Set is
		● Language setting  pg. 20
completed, “SCAN
		● Tuner setting  pg. 26
COMPLETED” will appear on the
	PRESS (MENU) TO END	● Clock setting  pg. 24
TV screen. If “SCAN
COMPLETED –NO SIGNAL–” is
displayed on the TV screen, make sure that the aerial cable is
connected to the unit properly and press OK on the Remote.
The unit will try Auto Channel Set again.

Page 17

4 August 2003 6:42 pm