JVC HR-XVC33UM manual 80 EN

Filename [XVC33UM_10Subsidiary.fm]
XVC33UM_01.book Page 80 Monday, August 4, 2003 7:24 PM	Masterpage:Left+

80 EN		SUBSIDIARY SETTINGS (cont.)
8 ANALOG DOWN MIX	Set to the appropriate mode according to your audio system when you play
DOLBY SURROUND	back a DVD VIDEO disc recorded with surround multichannel audio. This
STEREO	setting affects only the analogue audio output signal from the AUDIO OUTPUT
	connectors (DVD) when playing back a DVD VIDEO disc recorded with
	surround multichannel audio.
	DOLBY SURROUND:
		Select this when you enjoy multichannel surround audio by
		connecting the unit’s analogue AUDIO OUTPUT connector
	STEREO:	(DVD) to a surround decoder or an internal amplifier.
		Select this when you enjoy conventional 2-channel stereo
		audio by connecting the unit’s analogue AUDIO OUTPUT
		connectors (DVD) to a stereo amplifier/receiver or TV, or when
		you dub audio of a DVD VIDEO disc recorded with surround
		audio to your MD, cassette, etc.
	NOTE:
	The “ANALOG DOWN MIX” function does not work when the 3D Phonic function is
	activated. ( pg. 46)
8 D. RANGE CONTROL	The dynamic range (the difference between the loudest sound and the quietest
WIDE RANGE	one) can be compressed during playback of a program encoded in Dolby
NORMAL	Digital format.
TV MODE	This function takes effect when a DVD VIDEO disc recorded in Dolby Digital
	format is played back at low or middle volume.
	WIDE RANGE: Select this to inactivate this function when you enjoy wide
		dynamic range program.
	NORMAL:	Normally select this setting to activate this function.
	TV MODE:	Select this when you hear the sound through the TV's
		speaker(s).
	NOTES:
	● This function works only when playing back a disc recorded with Dolby Digital format.
	The setting is not effective for other discs.
	● This function does not work when the 3D Phonic function is activated. ( pg. 46)
8 OUTPUT LEVEL	You can lower the output level of analog audio to accommodate the unit to the
STANDARD	connected A/V equipment.
LOW	STANDARD:	Normally select this.
	LOW:	The output level of analog audio is lowered.

Page 80

4 August 2003 6:42 pm