JVC HR-XVC33UM manual 26 EN, Access the Tuner Set screen, Perform Auto Channel Set

Filename [XVC33UM_06Index.fm]

XVC33UM_01.book Page 26 Monday, August 4, 2003 7:24 PMMasterpage:Left+

26 EN		INITIAL SETTINGS (cont.)
Tuner Set	Auto Channel Set
	Perform Auto Channel Set only if channels have not been set
	correctly by the Plug&Play setting.
	A
		Turn on the unit.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.	Press POWER (1).

INFORMATION

The unit selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Access the Main Menu screen.

Press SET UP MENU.

D Access the Tuner Set screen.

Press rt to move the highlight bar (arrow) to “TUNER SET”, then press OK or e.

E Perform Auto Channel Set.

Press rt to move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press OK or e. You can automatically set the receivable channels in your area in the order of their frequencies.

● When Auto Channel Set is complete, “SCAN COMPLETED” appears on the TV screen.

●If the scan was unsuccessful,

“SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the connections and start again.

F Return to the normal screen.

Press SET UP MENU.

Page 26

4 August 2003 6:42 pm