JVC HR-XVC33UM manual Angle Selection, Select the view angle Access the menu, Press Angle

Filename [XVC33UM_08DVD.fm]
XVC33UM_01.book Page 55 Monday, August 4, 2003 7:24 PM	Masterpage:Right-No-Heading

EN 55

Angle Selection

When using the ANGLE button:

You can enjoy a variety of scene angles if the DVD VIDEO disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles.

If the disc contains “multi-angle” parts, “ ” appears on the TV screen at the beginning of the “multi-angle” part when “ON SCREEN GUIDE” is set to “ON”.

●During playback

When using the on-screen bar

A Access the on-screen bar.

Press PLAY SETUP twice. The on-screen bar appears on the TV screen.

B Select menu item.

Press w e to move 0 to , then press OK.

●The following pop-up window appears under the selected item.

Example: The first view angle is selected out of 3 view angles recorded.

C Select the view angle.

A Access the menu.

Press ANGLE.

●The following pop-up window appears on the TV screen.

Example:The first view angle is selected out of 3 view angles recorded.

B Select the view angle.

Press rt or ANGLE repeatedly to select the desired view angle, then press OK.

●Each time you press the button, the angle of the scene changes.

●The pop-up window disappears if no operation is done for about 5 seconds.

Example:

1/3]2/3]3/3](Back to the beginning)

1	1
	1

1

Press rt repeatedly to select the desired view angle, then press OK.

●Each time you press the button, the angle of the scene changes.

To clear the on-screen bar

Press PLAY SETUP.

NOTE:

When “X” appears on the TV screen in step C, the current scene is not recorded from multiple angles.

Page 55

4 August 2003 6:47 pm