JVC HR-XVC33UM manual VFP function, Adjusting the picture quality

Filename [XVC33UM_08DVD.fm]

XVC33UM_01.book Page 47 Monday, August 4, 2003 7:24 PMMasterpage:Right-No-Heading

EN 47

VFP function	4 Select the parameter.
— Adjusting the picture quality	Press rt repeatedly to select a parameter you want to
	adjust, then press OK.
	● Adjust gradually and confirm picture appearance results are as
	preferred.

The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programing, picture tone or personal preference.

NOTE:

Before you start operation;

The VFP setting screen disappears if no operations are done for more than about 10 seconds. If the setting screen disappears before you finish, start from step 1 again.

1Access the VFP setting menu.

Press DVD PICTURE during

playback.NORMAL

● The current setting appears on	GAMMA	+0
	BRIGHTNESS +0
the TV screen.	CONTRAST	+0
	SATURATION	+0
	TINT	+0
	SHARPNESS	+3
	Y DELAY	+0

2Select the VFP mode.

GAMMA	Controls brightness of neutral tints while
(–4 to +4):	maintaining brightness of dark and bright
	portions.
BRIGHTNESS	Controls screen brightness.
(–16 to +16):
CONTRAST	Controls screen contrast.
(–16 to +16):
SATURATION	Controls screen color depth.
(–16 to +16):
TINT	Controls screen tint.
(–16 to +16):
SHARPNESS	Controls screen sharpness.
(+0 to +3):
Y DELAY	Controls screen color gap.
(–2 to +2):

●VFP menu disappears and the following pop-up window appears on the TV screen.

Press w e repeatedly.

●Each time you press w e, the VFP mode changes as follows:

NORMAL]CINEMA]USER 1]USER 2](Back to the beginning)

NORMAL: Select this normally.

CINEMA: Suitable for movie.

USER 1/ You can adjust parameters that affect picture

USER 2: appearance and store settings. Go to step 3.

GAMMA +0

GAMMA +0

5Adjust the parameter.

Press rt repeatedly to change the setting, then press

OK.

●The current VFP settings appear again.

NOTE:

You cannot adjust the parameters of “NORMAL” and “CINEMA”.

To adjust picture appearance manually

3Access USER menu.

Press w e repeatedly to
select “USER 1” or “USER 2”.	USER 1

GAMMA +0

BRIGHTNESS +0

CONTRAST +0

SATURATION +0

TINT +0

SHARPNESS +3

Y DELAY +0

6Adjust the other parameters.

Repeat steps 4 and 5 to adjust other parameters.

To return to the normal screen

Press DVD PICTURE.

To activate your setting

Press DVD PICTURE, then press w e repeatedly to select “USER 1” or “USER 2” that you have changed the parameters.

Page 47

4 August 2003 6:47 pm