JVC HR-XVC33UM manual Enter the channel position, Engage the unit’s timer mode

Filename [XVC33UM_07S-VHS.fm]
XVC33UM_01.book Page 37 Monday, August 4, 2003 7:24 PM	Masterpage:Right-No-Heading

	EN 37
	NOTES:
F Enter the channel position.
	● You can program this unit to timer-record as many as 8
Press CH +/–.	programs. If you try to program the unit to record a ninth,
	“PROGRAM FULL” appears on the TV screen. To record the
	extra program, you must first cancel any unnecessary
G Set the tape speed.	programs. ( pg. 39)
	● In case of a power failure after programing, the unit’s memory
Press SP/EP.	backup keeps your selections for approximately 3 minutes.
	● Programs that start after midnight must have the next day’s
	date.
H Return to the normal screen.
	Cable Box or DBS Receiver Users
Press PROG. or OK. “PROGRAM COMPLETED” appears	To timer-record a satellite broadcast using Express Timer
on the TV screen for about 5 seconds, then the normal	Programing:
screen appears. If “PROGRAM NOT COMPLETED	A Perform steps A – I. Enter “L-1” for the channel position
	in step F.
PROGRAM OVERLAP” appears on the TV screen, see
	B Set the DBS receiver to the appropriate channel before
page 40.
	the selected program begins.
● Repeat steps B – H for each additional program.
	C Leave the DBS receiver’s power on.

I Engage the unit’s timer mode.

Press TIMER. The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press TIMER again.

To Timer-Record Weekly Or Daily Serials:

—anytime during steps C through G, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

Page 37

4 August 2003 6:42 pm