
Initial Setup (Continued)
Auto Chapter
During recording, chapter markers are added automati- cally at fixed intervals. You can set this interval to 5 min- utes or 10 minutes. To turn off automatic chapter mark- ing, select “OFF”.
DISC Settings
Disc Initialize
When you load a blank disc, the recorder will initialize the disc.
& SETUP
Disc Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
OFF
Also, you can format the disc from the Setup menu as
5 Min
10 Min
Prev.
Select
Close
shown below.
Disc Initialize | Start |
Disc Finalize
Disc Label
Disc Protect
PBC
AutoPlay
YourDVD
Prev.
Select
Close
1
2Use v / V to select the DISC option.
3 While the DISC option is selected, press B to move to the second level.
4Use v / V to select the Disc Initialize option.
Press B to move to the third | level. |
5 The Start icon is highlighted. |
|
6The Disc Initialize menu appears.Press ENTER.
7desired Disc Initialize Mode (VR Mode or Video Mode) then press ENTER.If the disc is a
Disc Initialize
Select a mode.
VR Mode |
| Video Mode |
Caution
If you change the disc format, everything recorded on the disc will be erased.
CONNECTIONS
25