Checking Timer Recording Details

Go-Video VR3840 manual Checking Timer Recording Details, Canceling a Timer Recording

Timer Recording

The Timer Recording function allows you to record up to 8 programs within a period of one month.

Press TIMER RECORD.

The Timer Record menu appears.

Timer Record

SP 198 min Free

Media

Ch.

Date

Start Time

End Time

Mode

DVD

Ch.11

10/16 Thu

10:07 AM

11:00 AM

TIMER REC Timer Rec List

•Media – Choose the desired media (DVD or VCR).

•Ch. – Choose the desired channel, or one of the external inputs from which to record.

•Date – Choose a date up to 1 month in advance, or select a daily or weekly program.

•Start Time – Set the recording start time.

•End Time – Set the recording end time.

•Mode – Choose a Record mode. DVD: XP, SP, LP, EP, or AT (Auto) VCR: SP, SLP, AT (Auto)

AUTO mode determines how much time is avail- able on the disc or tape and switches the Record mode, if necessary, to complete recording the program.

2Recording(s).

•b / B (left/right) – Moves the cursor left/right

•v / V (up/down) – Changes the setting at the cur- rent cursor position

•Press RETURN to exit the Timer Record menu.

•Press ENTER after filling in all the program infor- mation.

•Press TIMER RECORD to display the Timer Record List.Enter the necessary information for your Timer

	Press ENTER to save the program.
3 The Timer Record List will appear.
4	Press RETURN (O) to exit the Timer Record
	List.

5Be sure to load a recordable disc or tape.

ote

•The Timer indicator lights on the front panel display.

•If the Disc and Tape indicator are blinking, either no disc or tape is loaded, or the loaded disc is not recordable.

•The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use the AUDIO button to set the audio before switching the DVD Recorder+VCR to Standby mode.

•You must press STOP to stop the Timer Recording.

•The DVD Recorder+VCR will automatically power off when the Timer Recording ends.

•There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded.

Press TIMER RECORD twice to check your Timer Recording settings.

•Use v / V to select a program.

•Press ENTER to edit the selected program. The Timer Record menu appears.

•Press CLEAR to delete the selected program from the Timer Record List.

Timer Record List

Media Ch.	Date	Start Time	Duration	Mode	Check
Ch.11	10/19 Sun	18:07 AM	30min	SP	Rec. OK

Edit

CLEAR Delete

TIMER REC Timer Rec

Canceling a Timer Recording

You can clear a Timer Recording any time before the recording actually starts.

•Use v / V to select the program you want to erase on the Timer Recorder List, then press CLEAR.

Stopping a Timer Recording in Progress

After a Timer Recording has started, you can still cancel the program by pressing STOP.

Timer Recording Troubleshooting

Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:

•No disc is loaded.

•A non-recordable disc is loaded.

•Disc Protect is set to ON in the Disc Settings menu; see page 26.

•There are already 99 titles recorded on the disc.

You cannot enter a Timer Recording if:

•A recording is already under way.

•The start time has already passed.

•Eight Timer Recordings have already been set.

If two or more Timer Recordings overlap:

•The earlier program takes priority.

•When the earlier program finishes, the later program starts.

•If two programs are set to start at exactly the same time, the program entered first takes priority.

Confirmation is not possible when:

•The Disc Protect setting is set to ON.

•There are already 99 titles recorded on the disc.

If the disc is damaged, the recording may not complete successfully, even if the Check field shows “Rec. OK”.