Go-Video VR3840 manual Basic Recording, One Touch Copy DVD to VHS, One Touch Copy VHS to DVD

Basic Recording

One Touch Copy - DVD to VHS

You can copy the contents of a DVD to a VHS tape using the COPY button.

ote

If the DVD you are attempting to copy is copy-protect- ed, you will not be able to copy the disc. It is not permit- ted to copy Macrovision encoded DVDs. “Copy-protect- ed. Cannot record.” is displayed on the TV screen.

Insert a VHS Tape

1 Insert a blank VHS videotape into the VCR deck.

Insert a Disc

2 Insert the disc you wish to copy in the DVD deck and close the disc tray.

3remote control or pressing DVD/VCR on the front panel.Select DVD mode by pressing DVD on the

4you want to start recording using the PLAY, FF, REW and PAUSE functions.

For best results, pause playback at the point from which you want to record.Find the place on the DVD (or Disc) from which

Press the COPY button on the remote control or
5 front panel.
The Copy to VCR menu appears.
Copy to VCR	- -%
Free Space
Rec. Mode	SP
Copy	Stop

Use v / V / b / B to select the desired Record

6 Mode:

• SP (Standard Play)

• SLP (Super Long Play, 3 times SP).

7copying.

ip

If you press PAUSE during Copy mode, both the DVD and VCR decks go into Pause mode and the “DUB” indicator blinks on the front panel display. While in Pause mode, you can adjust the DVD playback position using PLAY, REW, FF, PAUSE/STEP, etc. The VCR deck will remain in

Pause mode. To resume copying, press the COPY button twice.Select Copy then press ENTER or COPY to start

Stop the Copy Process

8 To stop copying at any other time, press STOP (x). You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

One Touch Copy - VHS to DVD

You can copy the contents of a VHS tape to a record-
able DVD using the COPY button. This allows you to
archive your old VHS tapes to DVD.		RECORDING
	ote
If the VHS videotape you are attempting to copy is
copy-protected, you will not be able to copy the tape. It
is not permitted to copy Macrovision encoded tapes.
1	Insert a recordable disc.
	Insert a blank DVD-R/RW disc in the DVD deck and

close the disc tray.

ote

When using a DVD-RW disc, you must initialize the disc in VR or Video mode; see page 25.

2Insert the VHS videotape you wish to copy into the VCR deck.Insert a VHS Tape

3remote control or pressing DVD/VCR on the front panel.Select VCR mode by pressing VCR on the

4want to start recording using the PLAY, FF, REW and PAUSE functions.

For best results, pause playback at the point from which you want to record.Find the place on the VHS tape from which you

	Press the COPY button on the remote control or
5 front panel.
	The Copy to DVD menu appears.
	Copy to DVD
		01H47M
	Free Space
	Rec. Mode	SP
	Copy	Stop
	Use v / V / b / B to select the desired Record
6 quality:
	• XP (1 hr/disc)
	• SP (2 hrs/disc)
	• LP (4 hrs/disc)
	• EP (6 hrs/disc)
7	Select Copy then press ENTER or COPY to start
	copying.

ip

If you press PAUSE during Copy mode, both the DVD and VCR decks go into Pause mode and the “DUB” indicator blinks on the front panel display. While in Pause mode, you can adjust the VCR playback position using PLAY, REW, FF, PAUSE/STEP, etc. The DVD deck will remain in Pause mode. To resume copying, press the COPY button twice.

Stop the Copy Process

8 To stop copying at any other time, press STOP (x). Copying will stop automatically when the VHS tape ends.

43