Sony CD-X1500 owner manual Cue, Flash Start

Page 12

3-1. CUE

The CD-X1500 can memorize the play start point as a cue point. If cue point is memorized, pressing

the CUE key locates the unit to the cue point.

To memorize the CUE point

There are two ways to store the cue point. Pressing and holding the SHIFT key then pressing CUE selects the method for the CUE key’s operation.

: Last play start point is stored as the CUE point.

: Pressing the CUE key when unit is paused stores the current point as the cue point.

Stutter play with the CUE key

When the unit is paused at the cue point, the unit will play when this key is pressed, and enter pause mode when CUE is released.

If the PLAY key is pressed during CUE playback, the unit will go into normal play mode.

3-2. CUE 1-3

The CD-X1500 can have another three cue points stored with the CUE 1-3 keys.

To memorize the CUE 1-3 points

1.Find the desired point.

2.Press the SET key. The parameter display shows

.

3.Press the desired CUE key.

When the CUE key has the stored point, the CUE key lights. The stored cue point cannot be erased but can be overwritten.

NOTE

When the unit is paused and the indicator in the LCD lights, pressing the SET key then pressing the CUE 1-3 key starts the unit automatically.

When the unit is paused and the indicator in the LCD doesn’t light, press- ing the SET key then pressing the CUE 1- 3 key flashes the pressed CUE 1-3 key three times then lights.

For three seconds after storing the cue point, you cannot store another cue point.

Stutter play with the CUE 1-3 keys

When the unit is paused at the cue 1-3 point, the unit will play when the appropriate CUE 1-3 key is pressed, and enter pause mode when CUE 1-3 is released.

If the PLAY key is pressed during CUE playback, the unit will go into normal play mode.

3-3. Flash Start

The CD-X1500 has a flash start function that can be used with the CUE 1-3 keys.

When the flash start function is activated (when the indicator in the LCD lights), pressing the

CUE 1-3 key enables flash start.

NOTE

When the indicator in the LCD doesn’t light, the unit is back in cue mode. In this mode, pressing the CUE 1- 3 key locates the stored cue point then the unit pauses.

12 TASCAM CD-X1500 DUAL CD PLAYER

Image 12
Contents CD-X1500 Important for U.K. Customers Do not cut off the mains plug from this equipment… Do not expose this apparatus to drips or splashes Safety Information Demensions Environmental conditions Beware of condensationHandling of discs Main Unit Front Panel Main Unit Rear PanelRemote Controller Top Panel 0OPEN keyQSEARCH key WP.MODE / PGM keyLCD TTAP / Display keyYJog Wheel USCRATCH keyRemote Controller Bottom Panel Remote Controller LCDFlash indicator Memory bank indicatorsCUE indicator RDY indicatorCUE Flash StartB Looping Adjusting the tempo Pitch BendingKey Original Key control BrakeScratching Set the brake timeTrack Memory / Recall Track MemoryMemory data RecallFader Start Relay PlayAuto Cue Auto ReadyProgrammed Play Create the programEdit program Insert programPreset menu Delete programPress FLASH/DEL key Repeat Backup Memory Preset Number Parameter * default FunctionError Messages Consulte cualquier posible reparación únicamente Reproducción tartamuda con la tecla CUE Reproducción tartamuda conPara almacenar los puntos de Cambio del punto de final deCondiciones ambientales Cuidado con la condensaciónManejo de los discos Unidad principal panel frontal Unidad principal panel traseroMando a distancia Panel superior 0Tecla OpenQTecla Search WTecla P.MODE / PGMRLCD TTecla TAP / Display STecla CUEDTecla PLAY/PAUSE YRueda Jog FTeclas de salto de pistaMando a distancia Panel inferior Mando a distancia LCDIndicador Flash Indicadores de banco de memoriaIndicador A.CUE Indicador A.RDYInicio flash Para memorizar el punto CUEReproducción tartamuda con la tecla Para memorizar los puntos CUEBucle A-B Ajuste del tempo Inflexión tonalClave original Control de clave FrenadoAjuste del tiempo de frenado Cuando ajuste el rango del tempo y del control deMemoria de pista / carga Memoria de pistaDatos memorizados CargaBúsqueda automática Inicio por faderReproducción consecutiva Espera automáticaReproducción programada Edición del programaCreación del programa Inserción de programaMenú preset Borrado de programaNúmero preset Elemento Parámetro Copia de seguridadValor por defecto Mensajes de error Teac Corporation