Disc type: | 8cm / 12cm CD | Dimensions (W x H x D mm) |
|
Number of channels: | Main unit: | 482 x 94 x 272 | |
Resolution: | Remote control unit: | 482 x 88 x 83 | |
Sampling frequency: | 44.1kHz | Weight |
|
Analog output: | RCA pin jack | Main unit: | 5.7kg |
Output impedance: | <1kohm | Remote control unit: | 1.8kg |
Maximum output level: | +6dBV |
|
|
Digital output: | Coaxial | The following values are applicable when key and | |
Format: | IEC60958 Type II | tempo values are set to 0. |
|
Voltage requirements |
|
|
|
USA/Canada: | 120V AC, 60Hz | Frequency response: | 20 – 20kHz, |
UK/Europe: | 230V AC, 50Hz |
| |
Australia: | 240V AV, 50Hz | Dynamic range: | >95dB |
Power consumption: | 27W | S/N ratio: | >95dB |
|
| Total harmonic distortion: | <0.01% |
Error Messages
Err 01 TOC Read error - the disc's Table of Contents cannot be read within 20 seconds - try with another disc or remove and clean the existing disc before replacing it
Err 02 GFS error – GFS signal cannot be detected within five seconds - try with another disc or remove and clean the existing disc before replacing it
Err 03 Focus error - after repeating the attempt eight times to focus, an error still occurs - try with another disc or remove and clean the existing disc before replacing it
Err 04
Err 05 Loading error - the open or close operation cannot be completed, even after retries, or there is an internal error - make sure that there are no obstructions preventing the tray's operation
Err 06 Sled error - an internal drive error - try turning the power off, waiting a few seconds, and turning it on again
Err 07 Error in communication between decks - try turning the unit off, waiting a few seconds, and turning it on again
Err 10
If any of the numbered error messages occur, try using another disc.
If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again.
If the errors still continue or other error occurs, contact your TASCAM distributor for repair.
TASCAM