LG Electronics MW 71PY10 External Equipment Connections, VCR Setup, How to connect, How to use

Installation

External Equipment Connections

NOTE: Not all cables shown are included with the plasma display.

VCR Setup

-To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor.

-Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen.

How to connect

1.Connect the audio and video cables from the VCR's output jacks to the monitor input jacks, as shown in the figure.

When connecting the monitor to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

2. If you connect an S-VIDEO output from VCR to the S-	COMPONENT		VIDEO
VIDEO input, the picture quality is improved; compared to	INPUT 2	S-VIDEO R MONO	INPUT 2
	R L		L
	COMPONENT		VIDEO	VIDEO3	VIDEO4
	INPUT 1		INPUT 1
VIDEO	AUDIO	AUDIO	VIDEO
connecting a regular VCR to the Video input.
3. If you connect the Euro scart socket of the VCR to the Euro
scart socket of the set. No other connection is needed.

Mono VCR: Connect the video output cable from the VCR to the VIDEO input on the monitor.

S-VIDEO VCR: Connect the S-Video output cable from the

VCR to the S-VIDEO input on the monitor. (Note that S-

Video offers higher quality).

or

How to use		ANT OUT
1.	Insert a video tape into the VCR and press PLAY on the	ANT IN S-VIDEO	OUT
	VCR.	SWITCH	(R) AUDIO (L) VIDEO
		OUTPUT
	(Refer to the VCR owner’s manual.)	3 4	IN
2.	Use the INPUT button on the remote control to select		VCR

Video 1 or Video 3.

12 Plasma Monitor