Safety Instructions
Safety Instructions continued
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
15.CAUTION concerning the Power Cord :
Most appliances recommend they be connected to a dedicated circuit; that is, a single outlet circuit which pow- ers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
- This may cause a fire or an electric shock.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Use a dedicated power cord. Do not modify or extend the power cord.
Do not install, remove, or reinstall the unit by yourself (customer).
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. For installation, always contact the dealer or an Authorized Service Center.
Do not use if the power cord or plug is damaged, or socket is loose. Use a dedicated outlet for this appliance.
Do not over bend the power cord and do not place anything on the power cord. Do not install the monitor near any sharp edge to avoid wire damage.
16. Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.
17.Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Safety instruction (MW-71PY10G only)
18.When the trim becomes dirty or stained, softly polish the surface.
When polishing the surface, use gentle pressure. Heavy pressure can damage or discolor the surface. Clean the surface quickly and use gentle pressure. Heavy pressure can damage or discolor the surface. Keep the alcohol and the used cleaning towel out of the reach of children.
Do not use anything to scrape or scratch at the surface of this unit, this will cause damage to the surface. Use soft gloves while installing or removing this unit to prevent damaging the surface.
4 Plasma Monitor