LG Electronics 206-4071P manual Sleep Timer, Caption Lock, Poll Rate, Timing Pulse, Auto Camport

Page 13

Installer Menu

011 - KEY DEFEAT (Keyboard Defeat)

If set to 1, key defeat prevents the end user from accessing the on- screen menus with the display front panel—MENU, SELECT, and Left / Right arrow keys do not function. If set to 0, those keys do function. NOTE: The menus can always be accessed by pressing MENU on the remote.

015 - SLEEP TIMER

If set to 1, the SLEEP TIMER feature may be used. If set to 0, the Sleep Timer is not available.

016 - EN TIMER (Enable On/Off Timers) *

If set to 1, Timer function is available to user and enabled continuous- ly. Set to 0 to disable On/Off Timers. (Clock must be set in order to use Timers.)

017 - ALARM *

Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm function is available to end user. Set to 0 to disable the Alarm function.

NOTE: Clock must be set before the Alarm function will work.

021 - V-CHIP (Parental Control) *

Set to 1 to activate V-Chip (Parental Control); have it available to end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn V-Chip feature Off, not available to user; no programming restrictions can be set.

022 - MAX BLK HRS (Maximum Block Hours) *

Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours.

023 - CAPTION LOCK

Set to 1 to restore previous caption On/Off state after turn Off. If set to 0, captions are always Off at turn On.

028 - CH. OVERIDE (Channel Override)

If set to 1, the user can select channels with either Channel up/down or by direct keypad entry. If set to 0, only those channels that are entered for scanning can be selected.

029 - OLD OCV (On Command VideoTM)

Set to 1 for operation with systems from On Command Corporation.

030 - ACK MASK

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. When set to 1, changes M.P.I. for some OCV boxes.

* Only affects Function Menu if enabled by some PPV providers.

031 - POLL RATE

M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at default setting unless changed by Pay-Per-View provider. Step size of 16 ms.

032 - TIMING PULSE

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. Sets baud rate. Step size of 4.3 uS.

034 - CAMPORT EN. (Camera Port Enable)

Set to 1 to enable Video 2 input on display panel. If set to 0, Video 2 input on display panel is not functional.

NOTE: S-Video overrides Video jack.

035 - COMPPORT EN. (Computer Port Enable)

Enable/disables display panel HDMI1 input jack. Set to 0 to disable, set to 1 to enable DTV mode, set to 2 for PC mode.

NOTE: The setting above is ignored if Installer item 093 RJP AVAIL- ABLE, is set to 1.

038 - YPrPb EN. (Rear Component Video Enable)

Set to 1 to enable display panel rear Component Video input jacks. Set to 0 to disable display panel rear Component Video input jacks.

039 - REAR AUX EN. (Rear Aux Enable)

Set to 1 to enable display panel rear AUX (Video 1) input. Set to 0 to disable display panel rear AUX (Video 1) input. Note: S-Video overrides Video.

040 - AUTO CAMPORT

Set to 1 to automatically switch to Camport when equipment is con- nected to front Video input.

Set to 0 to disable front Video automatic source selection. NOTE: If set to 1, 093 RJP Available is automatically set to 0.

046 - STRT AUX SRCE (Start Aux Source)

Sets the starting AUX source. At power up, TV will tune to starting Aux source if item 004 Start Channel is set to 0.

If item 093 RJP Available is set to 0 and item

040 Auto Camport is set to 0:

 

1

= Video 1

4

= RGB

255 = Last Aux

2

= Video 2

5

= HDMI 2

 

3

= HDMI 1

6

= Component

 

If item 093 RJP Available is set at 1:

 

2

= Video 2

5

= HDMI 2

6 = Component

If item 040 Auto Camport is set to 1:

 

1

= Video 1

5

= HDMI 2

 

3

= HDMI 1

6

= Component

 

4

= RGB

 

 

 

206-4071-D

P A G E 1 3

Image 13
Contents Integrated TVs Typical Installer Menu Table of Contents Installing Batteries in Installer Remote Control Typical Installer Multi-Brand Remote ControlMulti Installer Remote Control Typical Key FunctionsCommercial Mode Setup for Master TV Turn to the next page to continue Cloning Setup Cloning Connections/Learning SetupBefore you begin cloning Master TV Clone ProgrammerLearn Setup from Master TV Cloning Learning Setup Learning the Master TV SetupLT2002 Clone Programmer Communication Problems Set the Clock OptionalDisconnect TV Power for 15 Seconds Teach Master TV’s Setup to the target TVTarget TV Clone Programmer Accessing the Installer’s Menu Installer MenuUsing the Installer’s Menu Installer Menu Items 000 throughInstaller Menu Items 035 through Installer Sequence Detailed Descriptions of Installer Menu ItemsMute Disable Caption Lock Sleep TimerPoll Rate Timing PulseAUX Status Back Lighting Atsc Tune ModeAtsc Band Start Minor ChannelClonable Menu Features Reference Clonable Menu FeaturesAdding Channel Icons and Labels in the 2-5-4 + Menu Mode Making a Master TV Reference Detailed Information For Making a Master TVDetailed Instructions Reference Checking Software Version Procedure for Checking Software VersionCamport Operation Stand-Alone TV Camport Auto Sense OperationCamport Operation PPV Troubleshooting TV Aux Input Configuration / TroubleshootingTroubleshooting Reset Clone After Static Shock Reference Cloning Procedure TroubleshootingClone Programmer Troubleshooting Problem Possible Causes Possible Solutions Clone ProgrammerController Quick Check Troubleshooting Flow ChartCommercial Mode Check Reference RJP Mode Configuration Glossary of Terms Copyright 2008, LG Electronics U.S.A., Inc