Installer Menu
093 - RJP AVAILABLE (Remote Jack Pack Available)
0 = Remote jack pack is not available or disabled.
1 = Series 100 RJP, HDMI Mode
Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI. Audio stream is expected from HDMI source. If no audio is pres- ent, no audio will be heard.
2 = Series 100 RJP, DVI Mode
Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI however, Audio is from selected audio source, based on the RJP’s audio hierarchical priority.
5 = Series 200 RJP, HDMI Mode
Enables RJP when an HDMI cable is inserted into RJP. VIdeo is from HDMI. Audio stream is expected from HDMI source. If no audio is pres- ent, no audio will be heard.
6 = Series 200 RJP, DVI Mode
Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI however, Audio is from selected audio source, based on the RJP’s audio hierarchical priority.
Notes:
•See Reference section, RJP Mode Configuration page.
•If set to 1, 2, 5 or 6, item 040 Auto Camport is automatically
set to 0.
Settings 1, 2, 5 and 6 allow the lodge staff to customize each TV’s RJP setup based on customer requirements.
094 - SAP MENU EN (2nd Audio Program)
Set to 1 to enable SAP feature on Function menu, if Function menu is available.
Set to 0 to disable SAP feature on Function menu, if Function menu is available.
096 - DEF. ASP. RATIO (Default Aspect Ratio)
Selects default aspect ratio at power up, see settings below.
Set to 0 “Set By System”.
Set to 1 for 4:3.
Set to 2 for 16:9 (Factory Default).
Set to 3 for Horizon
Set to 4 for Zoom 1
Set to 5 for Zoom 2
099 - BACK LIGHTING
Sets the TV screen brightness at power up, see settings below. Default setting is 100 power saving mode is disabled.
1 - 100 Static Backlighting.
(1 = Dimmest picture, 100 = Brightest picture.)
101 - 200 Dynamic Backlighting.
(101 = Dimmest picture, 200 = Brightest picture.) TV automatically controls backlighting depending upon the picture level of the current program.
102 - ATSC BAND
Sets up TV to receive different types of incoming signals: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.
103 - ATSC TUNE MODE
Sets ATSC tuning mode: Default set to 1 for Physical channel scan. Set to 0 for Virtual Channel scan.
104 - START MINOR CHANNEL
Sets
106 - ASP RATIO LOCK (Aspect Ratio Lock)
Set to 1 to retain previous aspect ratio with power Off.
Set to 0 to retain default aspect ratio with power Off. See item 96 Default Aspect Ratio above.
116 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for normal.
Set to 1 for blank.
117 - FACT DEFAULT (Factory Default) Set to 0 for normal.
Set to 1 to load presets to all of the previous item settings. WARNING: Setting this to 1 will reload the factory defaults
and clear the channel list including erasing any assigned Channel Icons and Custom Channel Labels.
P A G E 1 5 |