TIMER |
|
CLOCK | - |
ON TIME | - |
OFF TIME | - |
ON TIMER LIST | ANALOG |
PROGRAM NO | P01 |
CHANGE | MENU BACK |
Time data is obtained from Teletext; if no time data is available then select TIME with the up/down movement buttons and enter the current time with numeric buttons. Select the ON TIME and OFF TIME for television in the same manner and specify the time. From the ON TIMER LIST item, select your TV’s on mode at the end of the set time. Enter the program number you desire with the numeric buttons or the external source with the AV button into PROGRAM NO tab to specify the channel or source from which you would like the TV to be
of the time you specified, your television will automatically switch to
Note: Child lock feature is for Analogue mode only. Child lock tab does not appear in the menu in Digital mode.
When this feature is set to On and when you operate an external device that is connected to your LCD television via scart, TV will automatically switch to AV mode where the device is connected. When it is set to Off, your TV does not switch to the external device automatically.
7.3.4-Active Antenna
When using a portable aerial requring a power source, if this feature is set to on, you
can eliminate the need for a power source. For best results it is recommended to use an outdoor aerial.
7.4-Other picture features
7.4.1-Zoom
Press the ZOOM button on your remote control while watching a channel to activate this feature.
During the zooming process, the image is zoomed in in three stages oriented to the centre. To move the picture in this mode, you can use up/down or right/left movement buttons of your remote control.
Note: Zoom mode does not function with COMP/HDMI/PC inputs. Zoom mode is aborted when the channel is changed or Teletext is activated.
7.4.2-Freeze (Freeze picture)
You may freeze the program picture you are watching with this feature.
For this, press the FREEZE button on your remote control. The program picture will freeze until the same button is pressed a second time.
7.4.3-Using PIP Feature (Picture in Picture) (*)
Press the PIP button on your remote control. PIP screen is displayed. Depending on the selected source, a window will be opened in the main picture and a sub screen will be displayed. You can switch to PAP mode
by pressing the PIP button again. You can return to the TV mode by pressing the PIP button when you are in the PAP (Picture and Picture) mode. You can use Right/Left buttons to change the source in the PIP screen when you are in the PIP or PAP mode. You can use Up/Down buttons to change the channels.
Note 1: Two different channels from the Tuner can not be viewed in the PIP screen. Only the broadcast from the external source can be viewed in the PIP screen.
22