Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and
SETUP |
|
SYSTEM | I |
CHANNEL | S06 |
FINE TUNE | 0 |
SEARCH | P13 |
PROGRAM NO | |
STORE |
|
AUTOPROGRAM |
|
SELECT | MENU BACK |
confirm your selection with the
OK button. Setup menu will be displayed. Select system I (for UK use) from the SYSTEM tab. Move
into CHANNEL tab by pressing the Down movement button. Press OK on your remote control to select “S” for cable channels and “C” for channels received via the aerial. Move onto the PROGRAM NO tab and using the number buttons
enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the Left or Right movement buttons. The prompt STORED will be displayed briefly. The channel will be stored according to the program number of your choice. You can tune and store in memory other channels the same way. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button.
6.4.2.2-If you do not know the channel number
Press the MENU button. Move to the SETUP menu by pressing
the Down movement button in the Main Menu and confirm your
selection with the OK button. Setup menu will be displayed.
Select the system in which you would like to make the search
from the SYSTEM tab. Move into CHANNEL tab by pressing the Down movement button. Press OK on your remote control to select “S” for cable channels and “C” for channels received via the aerial.
Select SEARCH tab using the Up/Down movement buttons, and scan the channels in ascending order with Right movement button and in descending order with Left movement button. If the channel that is found is of your liking, select the STORE tab. Then store it in the memory by pressing the Right or Left movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections.
6.4.3-Fine Tuning
If the channel you found is not of
the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the Down movement button in the Setup menu. Using the Left/Right movement buttons on your remote control, adjust the broadcast
displayed on the screen to your desired quality. Under normal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need
it in case the television transmitters do not operate according to the standards. To store in the memory the settings you have made, select the Store tab and press the Right or Left movement button.
16