6.3.2-Manual tuning of channels and storing in the memory
In digital mode: Press MENU button, MAIN MENU will be
displayed. Select SETUP tab with Down movement button and
confirm with the OK button. SETUP menu will be displayed. Select MANUAL TUNING tab and confirm
by pressing the OK button. Manual Search Parameters menu will be displayed.
Manual Search Parameters |
|
|
|
Channel | 21 |
Frequency | 474000 |
Update of Channel List | Add channels |
|
|
Change 
Start 
Back
Highlight the Channel tab by means of Up/Down buttons and directly enter the frequency number
of the channel you want to search, if you know, by using the numeric keys on the remote control. If you don’t know the frequency number, you can scan frequencies by using the Left/Right movement buttons.
After entering the frequency you want to search, highlight Update of
Channel List tab with Up/Down movement buttons and select either one of Add channels, Replace channels or Erase channel list items, then press OK button to start searching. Channels will be searched or changed according to the search method you have chosen.
Channel Search
Waiting for signal...
Service found: |
|
|
TV: 0 | Radio: 0 | Other: 0 |
|
| Stop Search |
Add Channels : With this option, the new channels in the frequency which is desired to be manually searched will be scanned and added to the existing channel list.
Replace Channels : With this option, you can update the existing channel list with the modifications made by the broadcaster.
Erase Channel List : With this option, you can delete all channels in the existing channel list to store only the new channels in the desired frequency into the memory.
Note: You can also access the Manual Tuning menu from the Service Menu submenu under Digital Features menu.
6.3.3-Program Table
With the program table, you can see the stored channels in a list and create 6 favorite channels lists as you desire.
Select the PROGRAM TABLE item from the main menu by means of Up/Down movement buttons to
access program table and press OK button to confirm. Program Table will be displayed. You can
also access the program table menu directly by pressing the OK button on your remote control when there is not any open menu on the screen.
All TV
1Channel
2 Channel
3
4
5
Select |
| Back | |
Edit List | Change List | ||
| |||
|
|
12