Performing Analogue Tuning, Favourite Lists

6.3.5.5-Favourite Lists

Please see 6.3.3.2-Creating favorite channel list for detailed explanation of this feature.

6.3.5.6-Common Interface Module

To receive subscrıption channels you will need to purchase a conditional access module (CAM) and card. When no cam is fitted the display will show “No Common Interface module present.” However with a cam fitted the display will indicate “top up tv”.

In this menu, you can check the CI Module settings.

6.3.5.7-System Menu

You can display your television’s hardware and software data under this menu.

6.4-Performing Analogue Tuning

You can either tune the Analogue channels automatically or manually and store them in your television.

6.4.1-Automatic tuning of channels and storing in the memory

Note: If your television does not receive any aerial broadcast for a period of 5 minutes, it automatically switches to the stand-by position. The countdown OSD is displayed on the screen during the last 1 minute (applicable for Analogue mode only)

You can tune the programs automatically with the Autoprogram function of your television and then sort the channels

as you desire by means of the Program Table. Press AV button on your remote control, select ANALOGUE TV tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Your TV will switch to

Analogue mode. Press the MENU button on your remote control. Select SETUP tab with Down movement button and confirm with OK button. Setup menu is displayed.

Select PROGRAM NO tab by pressing the Up/Down movement buttons in Setup menu, enter the channel number to be searched and stored automatically, then select AUTOPROGRAM tab by using the Up/Down movement buttons and press OK button; Country Selection menu will be displayed.

COUNTRY SELECTION

BELGIUM	NETHERLANDS
CZECH REP	NORGE
DANMARK	ÖSTERREICH
DEUTSCHLAND	POLSKA
ELLADA	SCHWEIZ
ESPANA	SUOMI
FRANCE	SVERIGE
HUNGARY	TÜRKİYE
IRELANDA	U.K.
ITALIA	..........................

START AUTOPROGRAMMING

In the Country Selection menu, select the UK option, by pressing the right/left movement buttons and start autoprogramming by pressing the OK button. The channels will be automatically searched and those found will be stored in memory starting from the program selected in the Setup menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below.

To stop the process at any given time, please press the MENU button. The

AUTOPROGRAM

SEARCHING % 20

MENU STOP

Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete.

SETUP
SYSTEM	I
CHANNEL	S06
FINE TUNE	0
SEARCH	P13
PROGRAM NO	P13
STORE
AUTOPROGRAM
SELECT	MENU BACK