6.2-Turning on the TV and Setting the Channels
When you turn on your television for the first time, FIRST TIME INSTALLATION
CHECK AERIAL CABLE IS CONNECTED. PRESS OK KEY TO CONTINUE message is displayed. If the aerial connections are correct, press OK button to continue. COUNTRY SELECTION menu will be displayed. Select the country by using Up/Down, Left/Right movement buttons and press OK button to start the auto programming. Channel Search menu
will be displayed and digital channels are scanned and stored in the memory.
After completion of the searching process Channel Search Results menu will
be displayed. Number of TV and Radio channels already detected and stored in the memory at the end of the search process will be displayed in this menu. Finish the Digital channel searching process by pressing the OK button.
PRESS OK KEY TO START ANALOGUE SEARCH PRESS MENU KEY TO EXIT message will be displayed. You can make Analogue channel tuning with OK button or finish the searching process by pressing the MENU button.
6.3-Performing Digital Tuning
You can either tune the Digital programs automatically or manually and store them in your television.
6.3.1-Automatic Tuning of Channels and Storing in the Memory
Press AV button on your remote control, select DIGITAL TV tab from the SOURCE menu by using
Up/Down movement buttons and confirm by pressing the OK
button. Your TV will switch to Digital mode. Press MENU button, MAIN MENU will be displayed. Select SETUP tab
with Down movement button and confirm with the OK button. SETUP menu will be displayed.
SETUP
AUTO TUNING
MANUAL TUNING
FIRST TIME INSTALLATION
SELECT | MENU BACK |
Select AUTO TUNING tab and confirm by pressing the OK button. COUNTRY SELECTION menu will be displayed.
COUNTRY SELECTION
BELGIUM | NETHERLANDS |
CZECH REP | NORGE |
DANMARK | ÖSTERREICH |
DEUTSCHLAND | POLSKA |
ELLADA | SCHWEIZ |
ESPANA | SUOMI |
FRANCE | SVERIGE |
HUNGARY | TÜRKİYE |
IRELANDA | U.K. |
ITALIA | .......................... |
START AUTOPROGRAMMING
Select the country by using Up/ Down, Left/Rightmovement buttons and press OK button to start the auto programming. Channel Search menu will be displayed and digital channels are scanned and stored in the memory.
Channel Search
Waiting for signal...
Service found: |
|
|
TV: 0 | Radio: 0 | Other: 0 |
|
| Stop Search |
Note: You can also assess Auto Tuning menu from the Service Menu submenu under Digital Features menu.
11