Deleting a stored channel, To name the channels

6.4.4-Program Table

Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed.

PROGRAM TABLE
00	05	10
01 Channel 06		11
02 Channel 07		12
03	08	13
04	09	14
	SKIP	NAME
	MOVE	DELETE
	SELECT	MENU BACK

6.4.4.1-Switching the locations of the stored channels

Select the program you would like to relocate by pressing the Up/

Down or Left/Right movement

buttons. “Press the “GREEN” button. Green will blink. Move to the other program you would like to relocate by pressing the up/down or right/left movement buttons.

“Finish the relocation process by pressing the “GREEN” button. The channel in the first program number you selected has been moved to your second selected

program number and the channels between both program numbers have been shifted to the initially selected program number. After setting is complete, press the EXIT button to exit the menu.

6.4.4.2-Deleting a stored channel

Select the program you would like to delete by pressing the up/down or right/left movement buttons. “Press the “BLUE” button. The blue button on the menu

will blink for approval. “You may perform the deletion process by pressing the “BLUE” button or you may abort the deletion process by pressing the MENU button. “Once you press the “BLUE” button, the selected program is deleted and the following channels are transferred to

after this program number. After setting is complete, press the EXIT button to exit the menu.

6.4.4.3-Skipping a stored channel

In the event that you do not wish to see certain programs while navigating through the channels using the PR+/PR- buttons,

then you can use this function. Select the program that will be hidden by pressing the up/down or right/left movement buttons. “Press the “RED” button. The name of the program to be skipped shall appear in red. You may perform this procedure for more than one program. To view the skipped program, directly enter the program number using the numeric buttons. To cancel the program skipping process, press again the “RED” button. After setting is complete, press the EXIT button to exit the menu.

6.4.4.4-To name the channels

You can assign your program or programs of choice the names that have a maximum of five characters. Select the program you would like to name from the Program Table by pressing the up/down or right/left

movement buttons. “Press the “YELLOW” button. An empty space appears beside the channel for which you would like to specify name information. Here, choose the desired letter, number or sign using the up/ down movement buttons. For the second character, press the right movement button and then select the desired letter, number or sign again with the up/down movement buttons. After entering all the characters, store the name you have written in the memory by pressing the “YELLOW” button. To write names for any of the other programs, simply repeat the above procedure. If you want to exit the menu, simply press the EXIT button. If the program is not named, then the channel number of that program will be displayed automatically.