Mounting and Removing Flat Panel Screen
WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position the fl at panel screen.
Hook adapter brackets (BB) onto wall plate (AA).
3 Then slowly swing screen in as shown. Turn safety screws, using allen wrench (EE), clockwise at least six times to prevent screen from being removed as shown in detail 1 of fi gure 3.1.
Screen can be adjusted horizontally if desired as shown in fi gure 3.2.
NOTE: To lock the screen down, tighten security screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety/security screws, swing screen away from mount, and lift screen off of mount.
CAUTION
•Do not tighten screws with excessive force. Overtight- ening can cause damage to mount. Tighten screws to 40 in. • lb (4.5 N.M.) maximum torque.
BB
AA
AA
SECURITY
SCREWS
BB
DETAIL 1
fig. 3.1
fig. 3.2
8 of 34 | ISSUED: |
© 2009, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160 www.peerlessmounts.com