Sima Products SUR-35 user manual Other Features, Using Timers, New device, Creating a New Device

New device SUR-35 User Manual

Creating a New Device

SUR-35 User Manual Other Features

To create a new device, follow these steps:

Press and hold the SETUP button on the Touch Screen for 3 sec. Press each number button (2, 4, 6, 8) until it disappears.

Use the arrow buttons on the Touch Screen to select NEW (displayed in the upper right corner) and then press the OK button.

1.Press the device key you wish to use for this device.

The name of the selected device will be displayed in the upper right hand corner of the screen and will be blinking.

2.After selecting a device, use the arrow keys to change the letters and create your own label for that device.

3.Press the OK button.

4.Now you must select a device default screen. Use the up and down arrows to cycle through the selections. Note: the device screen you select must match the type of device or accessing pre-programmed codes may not be successful. For example, if you are adding a TV, select a TV default

screen.

&1

%3

2

&5

Chapter 6 – Other Features

The SUR-35 has the following additional features:

•Timers: Can be used to start a macro or send a command

at a later time. Many timers are available including: daily, weekly, weekends only, weekdays only, or specific days and times.

•Quick Channel Lists: Used to group certain TV or Satellite channels together. For example, group all news channels together to make it easy to cycle through only the news channels. The five Quick Channel buttons can store a total of 50 channels.

•Unrecognized Code Collection: Used to collect unrecognized codes that can later be emailed to Sima for analysis.

•System Setup Transmission: Can be used to transmit system setup to either a personal computer or another SUR-35.

•Sleep Mode: Can be used to issue a command after a specified time.

•Version: Will display the version number of your SUR-35.

Using Timers

Timers are fantastic way to automate functions to occur in the future. At a pre-set time, the SUR-35 will “wake up” and send the command or macro of your choice. Combined with a Macro you can use the SUR-35 to record movies, turn on music, act as an alarm clock, or perhaps make your home look and sound like someone is home – even if you’re not.

Note: you can program up to eight timers at one time.

Ch.	4
	5. Press OK to exit.
3
Page

Ch.

6

Page

18 43