Sima Products SUR-35 Preface, About this manual, Copyright, Trademarks, Troubleshooting

Preface SUR-35 User Manual

Preface

About this manual

This manual is designed to make using the SUR-35 Touch Screen Remote Control as easy as possible. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.

Copyright

© Copyright Sima Products Corporation 2002

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of Sima Products Corporation.

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

Sima Products Corporation

140 Pennsylvania Ave.

Bldg #5

Oakmont, PA 15139

800-345-7462 412-828-3700 www.simacorp.com

PN 21672

ii

	SUR-35 User Manual		Troubleshooting
Problem		Solution
IR LEARNING		Replace batteries in the SUR-35 and the
cannot be made		remote you are trying to learn from.
successfully.		Keep distance between remotes to about 2~4
		inches.
		Do not learn near an incandescent lamp.
		Memory capacity is full (56 keys for each of
		16 models).
		The learning process has no errors, but you
		still can’t control your AV devices: repeat the
		learning procedure again. If you still can’t
		solve the problem, use the code collection
		feature and email codes to Sima. (page 38)
		Original remote might not be compatible with
		learning procedure.
	Macro does not	Be sure to aim the SUR-35 at the devices
	work.	while the macro commands are being sent.
		Macro was not properly set up. Repeat
		macro set-up procedure. (page 47)
	A button of your	Some remotes issue multiple commands
	existing remote	when a button is held down.Please be sure
	performs two or	to teach different buttons of SUR-35 for
	more functions	these different commands. Each button of
		SUR-35 can only learn one command.
	The LCD screen	The SUR-35 is preset automatically to switch
	turns off.	the LCD off after the PowerDown time. Just
		tap the LCD screen or any button to turn			C
		the SUR-35 back on again. You can also
		reset the Power Down time period.
				Page
				59