Sima Products SUR-35 Controlling Devices, Selecting a Device to Control, Learning codes

Page 26

 

Learning codes

 

SUR-35 User Manual

 

 

 

 

Using the Learning Function

If you have the original remote, the SUR-35 has the ability to directly learn infrared codes.

Before Using the Learning Function

Before you start using the SUR-35’s learning function, please heed the following precautions:

Teach only one remote for each device . For example, don’t assign some of the buttons on the TV device screen to operate a TV in the living room, while assigning others to operate a different model TV in the bedroom. Each device button is capable of storing up to ten separate devices. Create a second device to teach a second TV.

To change from a device that has already been programmed, delete all of the commands for the first device before teaching new ones. For example, to operate the living room TV instead of the bedroom TV, delete all commands for the bedroom TV first. (See the Deleting a Device section.) Then re-configure the TV device screen for the living room TV.

When using the learning function, you must press each button within 2 minutes of pressing the last button. Otherwise, the SUR-35 will exit the learning mode and return to its normal operation mode.

A very small number of infrared codes are not learnable by the SUR-35. You may need to first collect the codes (see Collecting Unrecognized Infrared Codes for more information) and then email them to Sima.

Ch.

3

Page

SUR-35 User Manual

 

Operation

Chapter 4 – Controlling Devices

The SUR-35 is designed to be simple and straightforward to operate. This chapter explains how to use the SUR-35 to control all your devices. This Chapter assumes you have already setup the SUR-35 and assigned Infrared codes to different buttons. See Chapter 3 – Setting Up the SUR-35 to Control a Device for more information on assigning codes.

Selecting a Device to Control

1.Press one of the eight device buttons to pick the device. Each device button can store up to ten devices. Press the same device

button again to cycle through the

1

different devices in that bank.

&

Changing Touch Screen Pages

1. Press and release the Page Button to alternate between Page 1 and Page

2 of available Touch Screen

&

buttons.

1

 

Ch.

4

Page

26

35

Image 26
Contents Warranty Day Limited WarrantyAbout this manual TroubleshootingPreface CopyrightTable of Contents Appendix C Troubleshooting Creating and Using MacrosAccessories Appendix B AccessoriesSUR-35 Features Introducing the SUR-35Unpacking the SUR-35 Appendix a SpecificationsSpecifications Identifying ComponentsGetting Started Features OverviewResetting to Factory Defaults Beep TogglingBacklight Time Period FeaturesFeatures BacklightPower Down Power Down Time PeriodInstalling Batteries Changing SUR-35 ParametersTouch Screen Touch ScreenDisplaying Version Number Turning the Touch Screen OnRubber Buttons Using Sleep ModeSleep mode Touch Screen ButtonsMenus Transmitting System SetupUsing Quick Channel Lists Program MenusDelete channels Setup MenuSetup Menu Deleting Channels from a Quick Channel ListDelete Menu Delete MenuQuick Channels Using Quick Channel ListsSetting up Channel Lists Macro MenuMacro Timers Setting Up the SUR-35Setting Up Choosing a Device Setting Up a New TimerPress OK to confirm timer type Choose DeviceOther Features Other FeaturesUsing Timers New deviceMacros Using MacrosLabeling a Device Naming devicesButton to change to the Touch &1 Changing the Touch Screen LayoutLCD layout Available LCD choices for allPress OK to confirm your changes Define Macro Programming Infrared CodesProgramming Using Pre-programmed Manufacturer Codes Pre-set codesCreating a Macro Sequence Creating and Using MacrosIntroduction to Macros Auto search Controlling the DeviceOperation To use automatic search Automatic SearchSelecting a Device to Control Using the Learning FunctionControlling Devices Changing Touch Screen PagesSelect the device you Wish to delete. Make sure Learning from Another Remote ControlDeleting devices Deleting a Device Deleting a Specific Key Deleting buttonsLearning codes Collecting codes Press and hold the Setup Button on Touch ScreenCollecting Unrecognized Infrared Codes SoftKey