TROUBLESHOOTING GUIDE
SYMPTOM |
| POSSIBLE CAUSE |
| ||
|
| ||||
|
| ||||
Lights will not come | 1. Light switch is turned off. | ||||
on. |
| 2. Flood light | is | loose or | |
|
|
| burned out. |
|
|
|
| 3. | Fuse is blown or circuit breaker is | ||
|
|
| turned off. |
|
|
|
| 4. | Daylight | ||
|
|
| check after dark). |
| |
|
| 5. | Incorrect circuit wiring, if this is a | ||
|
|
| new installation. |
| |
|
| 6. | |||
|
|
| sired area. |
|
|
Lights come | on | 1. Light Control may be installed in | |||
in daylight. |
|
| a relatively dark location. | ||
|
| 2. | Light Control is in Test. | ||
|
|
| (Set control switch to an | ||
|
|
|
| ||
|
|
|
| ||
Lights come on for | 1. Light Control | may | be sensing | ||
no apparent | rea- |
| small animals or automobile traf- | ||
son. |
|
| fic |
| |
|
| 2. | Range is set too high . | ||
|
|
| (Reduce Range). |
| |
|
|
|
|
|
|
SYMPTOM | POSSIBLE CAUSE |
|
|
|
|
Lights stay on | 1. A flood lamp is positioned too close to |
continuously. | the sensor or pointed at nearby ob- |
| jects that cause heat to trigger the |
| sensor. (Reposition the lamp away |
| from the sensor or nearby objects). |
| 2. Light Control is pointed toward a heat |
| source like an air vent, dryer vent, or |
| |
| face. (Reposition sensor). |
| 3. Light Control is in Manual Mode. |
| (Switch to Auto.) |
|
|
Lights flash on | 1. Heat or light from the lamps may be |
and off. | turning the Light Control on and off. |
| (Reposition the lamps away from the |
| sensor). |
| 2. Heat being reflected from other ob- |
| jects may be affecting the sensor. |
| (Reposition sensor). |
| 3. Light Control is in the Test mode and |
| warming up. (Flashing is normal un- |
| der these conditions). |
| 4. Light may be leaking through the |
| floodlampreflectors.(Replacethelamps |
| with new high quality PAR 38 lamps). |
|
|
TECHNICAL SERVICE
(Do Not Send Products)
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at
P.O. Box 90004, Bowling Green, KY
*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.
No Service Parts Available for this Product.
To obtain a refund or replacement, return the Product to the place of purchase.
4 |