Revox M642 HD manual Multi-PIP function, Setting PIP

General operation

. To change PIP mode you can also use the [PIP] button on the remote control.

SETTING - PIP

Inputs / PIP	>	Main input:		TUNER
Picture	>	Main input settings		>
Display	>	PIP Mode:			PIP				Main
Sound	>	Secondary input:		SCART1			SCART1		picture		PIP
Set Up	>	PIP Size:					SCART2
Info	>	PIP Horiz.Pos.:					CVBS
		PIP Vert. Pos.:					TUNER
		Quick swap (F2)		"			YC
		←					YUV
						These options are not available for the settings <IN-
						PUTS / PIP		⇒ MAIN INPUT> ”PC (RGB)”
SETTING - SPLIT SCREEN						or ”PC (DVI)”.
Inputs / PIP	>	Main input:		TUNER					Main picture	PIP
Picture	>	Main input settings		>
Display	>	PIP Mode:	Split Screen
Sound	>	Secondary input:		SCART1
Set Up	>	Quick swap (F2)		"
Info	>	←

ENGLISH

Multi-PIP function

										The multi-PIP function allows the simultaneous dis-
										play of 16 television channels, 15 of which are in the
										form of a still picture (snapshot) and a continually up-
Inputs / PIP		>		Main input:		TUNER				dated picture, the current television channel being
Picture		>		PIP Mode:		Multi-PIP				shown as a live picture (the main picture).
Display		>		←
Sound		>								To start the multi-PIP function you can select via the
Set Up		>								OSD menu <INPUTS / PIP ⇒ PIP Mode> “Multi-PIP”
Info		>								or press the [PIP] button on the remote control several
										times.
										After starting the multi-PIP function the currently televi-
						Multi-PIP				sion channel setting is adopted as the active main pic-
					Split Screen			PIP	Off	ture (with a blue border) and then snapshots are gene-
										rated of the first 16 stored television channels. The
										multi-PIP groups of programmes are selected via the
	1	2			3	4	5			numeric buttons [1] to [6]: [1] = programme location 1
										to 16; [2] = programme location 17 to 32; . . ..
	16						6			The picture with the grey border marks the momenta-
										rily selected inactive television channel (snapshot or
	15		MAIN PICTURE				7			main picture). The snapshots are displayed clockwise
										starting from the top left. A snapshot is updated every
										second so that each snapshot is updated once every
	14						8
										16 seconds.
	13	12			11	10	9			When the main picture is active you can switch over
										the television channel that appears in the main picture
										by means of the programme buttons [Y] and [B] on the
										remote control.

VOL- Y Y

YP Y

VOL+Y

Y

BP B

To change the active picture from the main picture to multi-PIP snapshots and vice versa, press the blue button on the remote control.

When multi-PIP snapshots is active you can selected your desired television channel in the snapshots by pressing buttons [A] and ["]. To adopt this channel in the active main picture you must press the blue button again.

To change the television channel for an active snaps- hot (blue border), press the button [Y] or [B].

Once you have selected the programme group 1 to 16, all changes to the snapshot settings are stored as fa- vourites. You can set the favourites with the button [0].

ENGLISH 21