Revox M642 HD manual Auto setup function, Setting user formats

Getting started

Auto setup function

The display always automatically runs the auto setup function when an analogue video format (RGB) is used for the first time. During this period the display moves slightly back and forth to reach the optimal position and picture.

The H/V (horizontal/vertical) position and the picture size have to be set manually for several incompatible PC for- mats. The auto setup function is highly dependent on the picture display.

A full-screen white picture is ideal.

ENGLISH

Main input:	PC (RGB)
Main input settings		>
PIP Mode:		Off
←

H Freq.:		60.0 kHz
V Freq.:		75.0 Hz
Pixel Clk:		78.75 MHz
H / V Pol:	+ / -
User timings	>
Auto Setup	"
V Pos:
V Size:
H Size:
H Pos:
Phase
←

. If you would like to activate auto setup manually, select the option <INPUTS / PIP ⇒ MAIN INPUT SETTINGS ⇒ AUTO SETUP>.

Setting user formats

You have the option of storing frequently used formats as user formats. The display unit detects these stored formats and imme- diately displays them correctly without running the auto-adjust function.

H Freq.:		60.0 kHz
V Freq.:		75.0 Hz
Pixel Clk:		78.75 MHz
H / V Pol:	+ / -
User timings	>
Auto Setup	"
V Pos:
V Size:
H Size:
H Pos:
Phase
←

Position:	1
Recall	"
Save	"
Delete All	"
←

. Select the option <INPUTS / PIP> from the main menu and choose the submenu <MAIN INPUT SETTINGS>. Another submenu opens.

. Select the option <USER TIMINGS>.

. You can now save the user format that is set at the moment, for example, in position 1 (8 positions are possible) by selecting the option <SAVE>.

Under the option <RECALL> you can retrieve a stored user format and with <DELETE ALL> you can delete all sto- red user formats.

ENGLISH 15