Image, DynamicBlack Nero 3D-2/ 3D HB | Sim2 Multimedia NERO 3D HB

Note: When viewing 3D contents, the PureMotion3D mode is automatically activated.

DynamicBlack (Nero 3D-2/ 3D HB)

This adjustement is available only on the Nero 3D-2 and Nero 3D HB. DynamicBlack improves the level of black and increases the depth and the detail of the image especially in parts with low and medium brightness. It regulates light based on the informative content of the image being projected. Available settings are Off, Video and Movie. Off is recommended when using test pattern for measurement or calibration purposes.

PureMotion

Activates the motion estimation/motion compensation function, which suppresses motion judder. Settings available are Off, Low, Medium, or High. Default setting is Low.

Image

This menu section provides access to some advanced image settings. Adjustments not available for a given input are not displayed in the menu. See Table 4.4 for details.

Table 4.4

	Video	RGBS	RGB	HDMI 1/2
	Video	YPrPb	Graphics	HDMI 1/2

Aspect	●	●	●	●
Color Management	●	●	●	●
Gamma Correction	●	●	●	●
BrilliantColor	●	●	●	●
Overscan	●	●	●
Position	●	●	●
Frequency		●	●
Phase		●	●
Y/C Delay	●
Signal Range				● 1
Lamp Power	●	●	●	●

Notes:

1. when RGB or AVI infoframe missing or incomplete

Aspect

This adjustment changes the dimensions and aspect ratio (relationship between width and height) of the displayed image. There are six default aspects available and three user aspects (with user-settable parameters). You can select a different aspect for each source: the selected aspect ratio will be automatically applied the next time the relative source is displayed. You can also select the required aspect ratio from the re- mote control by repeatedly pressing or by pressing and one of the number

1-9. The following aspects are available:

4 Operation	Nero 3D	26
	User Guide