Sim2 Multimedia NERO 3D-2, NERO 3D-1 manual 3D content is displayed as two near-identical images

Page 37

3D content is displayed as two near-identical images

If they are next to each other, press the 3D key on the remote control and then choose Side by Side 3D Input Format.

If they are one above the other, press the 3D key on the remote control and then choose Top and Bottom 3D Input Format.

3D image lacks depth

Press the 3D key on the remote control, highlight the 3D Left/Right setting and then choose the value (either Normal or Swapped) that restores the correct sense of depth in the image.

HDMI Connection Issues

3D requires a substantial data throughput therefore use a good quality High Speed HDMI cable – with or without Ethernet.

Avoid using excessively long HDMI cables as this contributes to poor connec- tion issues.

Cable lengths over 10 m are not recommended.

Avoid using HDMI cables that have illuminated plugs or active systems that draw on the 5 V supply rail. If the 5 V drops lower than 4.7 V you will not get any picture!

Sparkles of random color on screen. This usually means that the cable doesn’t have the bandwidth capabilities to handle the signal.

Try changing the cable or use a shorter cable.

Try using a lower resolution for example if you are using 1080p try switch- ing to 1080i. If this solves the problem the cable is the likely culprit.

When switching inputs on either the projector or the AV Receiver/Processor sometimes the picture is either green or pink. This usually means the incor- rect color standard has been selected. This is sent automatically every time you switch HDMI inputs but sometimes the information is not received by the display.

Reselect input, if problem persists disconnect the HDMI cable to either the display or output of the receiver and reconnect – this instigate a hot- plug detect and should resolve the issue.

If the problem persists check with your AV receiver/processor/Blu-ray manufacturer for the latest software updates.

Try a different HDMI cable.

Snowy picture. This means that the HDCP system has not authorized the play- back of the material.

Usually re-selecting the input will resolve the problem.

If the problem persists then it is more than likely to be cable related. Try other cables.

Try bypassing other product in the system chain. For example connect the Blu-ray player direct to the projector.

5 Troubleshooting

Nero 3D

37

 

User Guide

 

 

 

 

Image 37
Contents User Guide Contents Important information SafetyBe careful with cables Power savingAvoid contact with liquids and exposure to damp Place the projector on a stable surfaceEnvironment 3D contentProduct disposal Introduction Key Features and BenefitsAbout This User Guide System Components Optional AccessoriesOverview Remote ControlCustom Remotes Operation Projector KeypadBatteries Inputs Connections3D Glasses 3D IR EmitterLocation InstallationMounting Orientation Ceiling MountingVertical Lens Shift Zoom and Focus KeystoneVideo Control Triggers AC PowerIR Emitter 3D GlassesSwitching On Switching On and OffSwitching Off To watch 3D Content via Blu-ray Viewing 3D ContentOperation 3D Mode To Watch 3D Content via Satellite, Cable and Games Console3D Menu 3D Left/Right 3D Input FormatSupported 3D Video Formats DVB Input MenuMain Menu Brightness PictureContrast Cinema Mode Sharpness ModeMode Nero 3D-2/3D HB ColorDynamicBlack Nero 3D-2/ 3D HB ImagePureMotion AspectColor Management BrilliantColor Gamma CorrectionOverscan PositionFrequency/Phase SetupDelay Signal RangeMenu Initial SettingsVariable Iris Nero 3D-2/3D HB Rgbs SyncSource List LanguageF1-F2 Keys Source InformationMemories OSD Display TimeoutHelp Menu OSD BackgroundRecall Save Current SettingsInfo Save Initial SettingsQuick Menus RenameMessages Troubleshooting Hdmi Connection Issues 3D content is displayed as two near-identical images3D image lacks depth Specifications Uxga 781 169 Screen Projection DistancesDimensions Page Page SIM2 USA