Sim2 Multimedia NERO 3D HB, NERO 3D-1, NERO 3D-2 manual Specifications

6 Specifications

Projection Type	Digital Light Processing (DLP), 1-chip
	DLP Type: 0.95 in., 1920 x 1080
Optical Engine	Die cast, based on SIM2 patented ALPHAPATH
Projection Lens	High-quality glass
	Throw ratio:
	 T1: 1.37-1.66:1
	 T2: 1.75-2.48:1
	 T3: 2.54-3.90:1
Lens shift	Manual (Vertical, up to +50% of image height with standard
	lens)
Zoom and Focus	Motorized (controlled via remote control and OSD)
Lamp	High pressure 280 W (dimmable to 230 W)
Inputs	 1 x Composite Video (RCA)
	 1 x Component - Analog YPrPB/RGBS (4 x RCA)
	 1 x RGBHV (D-Sub 15-pin female)
	 2 x HDMI 1.4 with 3D, DeepColor and InstaPort
Controls	 IR remote
	 Keypad on rear panel
	 RS-232 Serial commands
Communication Ports	 1 x USB 1.1 (type B) for serial commands and firmware
	upgrade
	 1 x RS232 (female D-Sub 9-pin) for serial commands and
	firmware upgrade
Outputs	 1 x VESA DIN-3 for 3D sync Out
	 1 x 12 V 100 mA jack for system on/off
	 1 x 12 V 100 mA jack for 4:3/16:9 aspect ratio
	 1 x 12 V 100 mA jack for anamorphic lens driving
Frequency	 Horizontal: 15-80 kHz
	 Vertical: 24-30 Hz and 48-120 Hz

6 Specifications	Nero 3D
	User Guide

38